Echo HCA-2620/S Operator's Manual page 24

OPERATION
1. Stop Switch
Move stop switch (A) away from
the STOP position.
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional four or five
times.
3. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grip
throttle handle and throttle
trigger lockout with left hand.
Rapidly pull recoil starter handle
(D) until engine starts.
Note: If engine does not start
after 2-3 pulls, use Cold Start Procedure.
24
HCA-2620/S
A
C
© 08/20 ECHO Incorporated
D
X7502342203