Epson PowerLite 745c Quick Setup page 3

4
If you see a blank screen or you don't see the image you are trying
to project from your computer, make sure the Power light on the
projector is green and not flashing, and the lens cover is off. If the
screen is still blank, restart your notebook, or press the Source Search
button on the projector again.
Windows :
®
function key that lets you display on an external monitor. It may have
an icon such as
5
If your projector and notebook don't display the same image, do
the following:
Windows: Try using the CRT/LCD or
above. If this doesn't work, double-click Display in the Windows
Control Panel. Make sure both the LCD screen and monitor port are
enabled. (Allow a few seconds for the projector to sync up.) See your
Windows online help for details.
Macintosh
®
then click Displays. Select the VGA Display or Color LCD dialog box,
click the Arrangement (or Arrange) tab, and make sure Mirror
Displays is checked.
Click here
Make sure this
is checked
Macintosh OS 9 or earlier:
Panels, then click Monitors or Monitors and Sound. Click the
Arrange icon, then drag one monitor icon on top of the other; this
lets you display on both the projection screen and the LCD screen.
If this option isn't available, click the Monitor icon and select a
Simulscan resolution.
Click here
6
If you see an image but it's not displayed correctly, press the Auto
button on the remote control to automatically readjust it.
If projecting wirelessly...
Follow the steps in this section to project over an 802.11g or 802.11b
wireless network from a computer running Windows 98, 2000, Me, XP, or
Macintosh OS X 10.2.4 or above.
NOTE: You must have already installed the projector's EasyMP (EMP NS
Connection) software and configured your projector and computer. See
the User's Guide for instructions. Also, your computer must have an
802.11g or 802.11b network card or transmitter installed.
1
Make sure you've turned on the projector and adjusted the image
as described in sections 1 and 2
on the front of this sheet.
2
Select EasyMP as the source by
pressing the EasyMP button
on the remote control.
3
Insert the Epson 802.11g card
with the label facing upward, as shown. When fully inserted, the end of
the card will protrude.
NOTE: Use only the Epson 802.11g card. Other brands may not be
compatible and are not guaranteed to work.
Hold down the Fn button on the keyboard and press the
, or it may be labeled CRT/LCD.
OS X: From the Apple menu, select System Preferences,
function key, as described
From the Apple menu, select Control
Drag one monitor
icon onto the other