Epson PowerLite 745c Quick Setup page 2

2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
3
If your image looks like
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4
If your image looks like
the projector to correct it.
3
Choose a
Presentation Method
How do you want to get images to the projector?
• To connect to a notebook, see "If connecting
to a notebook" below.
• To project over an 802.11g/b network, see
"If projecting wirelessly" on the back of this sheet.
You must have installed the projector's EasyMP
software and configured your projector and
computer before you can project wirelessly.
See your User's Guide for instructions.
• To give a presentation stored on a memory card,
see Chapter 5 in your User's Guide.
If connecting to a notebook...
1
Make sure you've turned on the projector and adjusted the image
as described in sections 1 and 2.
2
Locate the computer cable that came with the projector. Connect
one end to the projector's blue Computer/Component Video port.
Connect the other end to your notebook's video-out port or
monitor port. If you can't connect the cable to your
PowerBook , you may need to use an adapter. See your
®
PowerLite 745c User's Guide for instructions.
3
Press the Source Search button on the projector until your
computer image is displayed.
or , you've placed the projector off
or , press the
Zoom
or buttons on
Computer cable
TM
Wireless card
Turn over