Beko WM 84125W User Manual page 34

Troubleshooting
Washing takes longer time than specified in the manual.(*)
• Water pressure is low. >>>
to the decreased amount of water. Therefore, the washing time extends.
• Voltage might be low. >>>
• Input temperature of water might be low. >>>
washing time can be lengthened to avoid poor washing results.
• Number of rinses and/or amount of rinse water might have increased. >>>
water when good rinsing is needed and adds an extra rinsing step if necessary.
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too
much detergent usage. >>>
Programme time does not countdown. (On models with display)(*)
• Timer may stop during water intake. >>>
amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of
water. Timer indicator will resume countdown after this.
• Timer may stop during heating step. >>>
temperature.
• Timer may stop during spinning step. >>>
unbalanced distribution of the laundry in the drum.
Programme time does not countdown.(*)
• There might be an imbalance of laundry in the machine. >>>
activated due to the unbalanced distribution of the laundry in the drum.
Machine does not switch to spinning step.(*)
• There might be an imbalance of laundry in the machine. >>>
activated due to the unbalanced distribution of the laundry in the drum.
• The machine will not spin if water is not drained completely. >>>
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too
much detergent usage. >>>
Washing performance is poor: Laundry turns grey.(**)
• Insufficient amount of detergent was used over a long period of time. >>>
detergent appropriate for water hardness and the laundry.
• Washing was made at low temperatures for a long time over a long period of time. >>>
temperature for the laundry to be washed.
• Insufficient amount of detergent is used with hard waters. >>>
water causes the soil to stick on the cloth and this turns the cloth into grey in time. It is difficult to eliminate graying once it
happens. Use the recommended amount of detergent appropriate for water hardness and the laundry.
• Too much detergent is used. >>>
laundry.
34 / EN
Machine waits until taking in adequate amount of water to prevent poor washing quality due
Washing time is prolonged to avoid poor washing results when the supply voltage is low.
Required time to heat up the water extends in cold seasons. Also,
Use recommended amount of detergent.
Timer indicator will not countdown until the machine takes in adequate
Timer indicator will not countdown until the machine reaches the selected
Automatic unbalanced load detection system might be activated due to the
Use recommended amount of detergent.
Use the recommended amount of detergent appropriate for water hardness and the
Machine increases the amount of rinse
Automatic unbalanced load detection system might be
Automatic unbalanced load detection system might be
Check the filter and the draining hose.
Use the recommended amount of
Using insufficient amount of detergent with hard
Washing Machine / User's Manual
Select the proper