Special Programmes; Temperature Selection; Spin Speed Selection - Beko WM 84125W User Manual

Operating the product
• Sports
Use this programme to wash your garments
that are worn for a short time such as
sportswear. It is suitable to wash little amount
of cotton / synthetic blended garments.

5.6 Special programmes

For specific applications, select any of the
following programmes.
• Rinse
Use this programme when you want to rinse or
starch separately.
• Spin+Drain
Use this programme to apply an additional spin
cycle for your laundry or to drain the water in
the machine.
Before selecting this programme, select the
desired spin speed and press Start / Pause
button. First, the machine will drain the water
inside of it. Then, it will spin the laundry with
the set spin speed and drain the water coming
out of them.
If you wish to drain only the water without
spinning your laundry, select the Pump+Spin
programme and then select the No Spin
function with the help of Spin Speed
Adjustment button. Press Start / Pause button.
C
Use a lower spin speed for delicate
laundries.

5.7 Temperature selection

Whenever a new programme is selected,
the maximum temperature for the selected
programme appears on the temperature
indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature
will decrease gradually.
C
If the programme has not reached
the heating step, you can change the
temperature without switching the
machine to Pause mode.
Washing Machine / User's Manual

5.8 Spin speed selection

Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed
decreases gradually. Then, depending on
the model of the product, "Rinse Hold" and
"No Spin" options appear on the display. See
"Auxiliary function selection" section for
explanations of these options.
Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes,
you may use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the machine. Press Start /
Pause button after this process if you want to
drain the water without spinning your laundry.
Programme will resume and complete after
draining the water.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start / Pause
button.
The programme resumes. Water is drained,
laundry is spun and the programme is
completed.
C
If the programme has not reached the
spinning step, you can change the
speed without switching the machine
to Pause mode.
23 / EN