Sharp AN-K2LP Operation Manual page 27

Connecting to a Computer
When connecting a computer, ensure that it is the last device to be turned on after all the
connections are made.
Connecting to a computer with DIGITAL RGB output Terminal (DIGITAL)
• Before connecting the cable, switch the digital input type switch to "PC".
Computer
DVI output terminal
Note
• Select DIGITAL mode when connecting to digital output terminal of the computer. (See page 29.)
• Before switching "Digital input type switch" and connecting, ensure to unplug the power cord of the pro-
jector from the AC outlet and turn off the computer to be connected. After making all connections, turn on
the projector and then the computer.
"Plug and Play" function
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC com-
patible computer will communicate their setting requirements, allowing for quick and easy setup.
■ Before using the "Plug and Play" function, ensure to turn on the projector first and the connected
computer last.
Note
• The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
-26
(sold separately: AN-C3DV)
3
INPUT 5 terminal
DVI cable
1
Switch to "PC"
2