Table of Contents
Advertisement
Starting the programme
Press
.
▶
a The programme has ended when
the display shows "00h:00m".
Notes
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 31
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Activating button lock
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Requirement: "A programme has
started." → Page 31
Press
for approx. 3 seconds.
▶
a The button lock is activated and
will be automatically deactivated at
the end of the programme.
a The display shows "CL" when the
appliance is running.
a The button lock remains activated
with a power failure.
Deactivate button lock
Press
for approx. 3 seconds.
▶
Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
.
1.
a The programme is saved and the
appliance switches off.
Press
to resume the pro-
2.
gramme.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Press
▶
3 seconds.
a The programme is cancelled and
ends after approx. 1 minute.
Switching off appliance
Please note the information on
1.
"Safe use" → Page 10.
Press
.
2.
To prevent damage from dripping
3.
water, turn the water tap off tight
(not applicable to appliances with
Aqua-Stop).
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
Basic operation en
for approx.
during the wash
31
Advertisement
Table of Contents
