Table of Contents
Advertisement
Mounting the TV to a Wall
Remove the stand assembly before mounting the TV onto the wall.
1. Remove the 4 screws from the neck of the stand and detach the
stand.
2. This TV is designed to be wall-mounted
with a standard 200 mm x 200 mm
mounting kit (sold separately) designed
for flat-panel TVs. Mount this TV according
to the instructions included in the
mounting kit. Due to space restrictions, we
recommend that you make all connections
before mounting on to
the wall.
• If you are wall mounting your TV you may wish to buy a 90° HDMI adapter. This will help with your cable management.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our Call Centre on (UK) 0344 561 1234 or (Ireland) 1 890 818 575.
Our Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Front / Right Side View and Controls
1
Item
1
MULTI FUNCTION SWITCH
2
POWER LED
3
IR (Infrared Receiver)
JVC 43' LED Smart 4K HDR TV LT-43C890 Manual.indd 9
200mm
Four mounting holes
200mm
(size M6 screw)
10-13mm
M6
2
3
Description
Switches the TV into standby and on. Selects modes (channel,volume, and source).
Illuminates when the TV is in standby mode. The LED will blink confirming that a timer
recording programme has started in the standby mode.
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Preparation
2
x4
LAN
VGA
SPDIF
Optic.OUT
LAN
SPDIF
VGA
Optic.OUT
9
07/12/2018 08:23
Advertisement
Table of Contents
