Mounting The Tv To A Wall - JVC LT-55C550 Instruction Manual

Preparation
2

Mounting the TV to a Wall

Remove the stand assembly before mounting the TV onto the wall.
1. To remove the stand assembly, untighten the screws holding the stand assembly at the rear of the TV. Remove the stand
assembly.
Keep all the spare screws should you want to use the stand assembly option.
2. This TV is designed to be wall-mounted with a standard mounting kit (sold separately) designed for flat-panel TVs. Mount this
TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all
connections (refer to page 18-22 and page 50 for details) before mounting on to the wall.
• Some models of TV are provided 4 screws inside the mounting holes. Be sure to use these supplied screws with your
mounting kit when attaching the mounting hooks to the TV set. The supplied screws are designed for the TV. Use of
screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.
• Before mounting on the wall, untighten the screws inside the mounting holes.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance:
For UK, please call our UK Call Centre on 0344 561 1234.
For Ireland, please call our Ireland Call Center on 1 890 818 575.
12
400 mm
Four mounting holes
(size M6x8 screw)