Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG 65320 K
Summary of Contents for AEG 65320 K
- Page 1 65320 K Ceramic Glass Hob User Instructions...
-
Page 2: Dear Customer
Dear customer, Please read these operating instructions through carefully. Above all, please observe the “Safety“ section on the first few pages. Please retain these operating instructions for future reference. Pass them on to any subsequent owners of the appliance. The warning triangle and/or specific words (Warning!, Caution!, Important!) are used to highlight information that is important for your safety or the function of the appliance. -
Page 3: Table Of Contents
The Key Features of Your Appliance ......Appliance Description 65320 K ....... . . 10 Control panel 65320 K . - Page 4 Contents Cleaning and Care ..........25 Ceramic glass cooking surface .
-
Page 5: Operating Instructions
OPERATING INSTRUCTIONS Safety The safety aspects of this appliance comply with the accepted technical standards and the German Appliance Safety Law. However, we also consider it our obligation as a manufacturer to make you aware of the following safety information. Electrical Safety •... -
Page 6: Safety When Cleaning
Safety Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressure cleaner. • Clean the hob in accordance with the maintenance and cleaning instructions in this manual. How to Avoid Damage to Your Appliance •... -
Page 7: Disposal
Disposal Disposing of packaging material All materials used can be recycled. The plastics are marked as follows: • >PE< for polyethylene, e.g. as used for the outer wrapping and the bags inside. • >PS< for polystyrene foam, e.g. as used for the packing pieces, com- pletely free of CFCs. -
Page 8: The Key Features Of Your Appliance
The Key Features of Your Appliance The Key Features of Your Appliance • Ceramic glass Cooking Surface: the appliance has a VITRAMIC® cooking surface made of glass ceramic and 4 fast heating cooking zones. The particularly powerful radiant heater elements significantly shorten the amount of time taken for the zones to heat up. - Page 9 The Key Features of Your Appliance • Timer: all four rings can be automatically switched off using the integrated timer. When the end of the cooking time has been reached, the cooking zone switches off.
-
Page 10: Appliance Description 65320 K
Appliance Description 65320 K Appliance Description 65320 K Cooking zone dimensions: rear left: 145 mm rear right: 170/265 mm front left: 120/170/210 mm front right: 145 mm... -
Page 11: Control Panel 65320 K
Control panel 65320 K Mains “On/Off“ button n For switching on the appliance. The appliance is –switched on when the button is touched for approx. one second, –switched off when the button is touched again for one second. When the appliance is switched on the “Heat Setting/Residual Heat“... -
Page 12: Heat Setting Selection + And
Appliance Description 65320 K Heat setting selection + and - For setting and adjusting the heat setting (! to )) for the selected cooking zone, or when in timer mode, to set or change the required cooking time. –The heat setting or the cooking time is increased using the + but- ton and the automatic warm up function activated. -
Page 13: Automatic Pan Sensing
Automatic pan sensing Pan and triple ring sensing is automatically activated when the cooking zone is switched on. If a cooking zone button is pressed, but there is not a suitable pan on the cooking zone, or the pan is too small, f (Fault) appears in the dis- play. -
Page 14: Before Using For The First Time
Before Using for the First Time Before Using for the First Time Cleaning for the first time Wipe the ceramic glass cooking surface with a damp cloth to remove any traces left from manufacturing. Important: Do not use any caustic, abrasive cleaners! The surface could be damaged. -
Page 15: Cooking With The Automatic Warm Up Function
Cooking with the automatic warm up function All four rings on the cooking surface have nine heat settings and are equipped with an automatic warm up function. –!, lowest heat setting –), highest heat setting –a, automatic warm up function. Using the + button select the heat setting that you require for cook- ing, once the pan is hot, the cooking zone operates for a set period of time at full power (a = automatic warm up function) and then... -
Page 16: Cooking Without The Automatic Warm Up Function
Operation of the Cooking Surface If you select a higher setting when the automatic function is in opera- tion, e.g. from § to %, the previous warm up time is taken into account. If you select a lower setting, then the automatic warm up function is brought to an immediate end. -
Page 17: Locking/Unlocking The Control Panel
Locking/unlocking the control panel At any time during the cooking process, the control panel can be locked, with the exception of the “On/Off“ button. By this means acci- dental changes to the settings can be prevented. This function is also useful as a child safety measure. -
Page 18: Timer Function
Operation of the Cooking Surface Timer function Setting/changing the cooking time 1. Select the desired cooking zone using the cooking zone selection but- tons and set the desired heat setting. 2. Press the “Timer“ button to activate the timer function for this cooking zone. -
Page 19: Ending The Timer Function Early
Ending the timer function early There are two ways of switching off the timer early: Switching off the cooking zone and timer simultaneously 1. Select the desired cooking zone using the cooking zone buttons. If the selected cooking zone is in timer mode (TIMER indicator illumi- nated), the remaining cooking time appears in the timer display field. -
Page 20: Automatic Pan And Triple Ring Sensing
Operation of the Cooking Surface Automatic pan and triple ring sensing Pan and triple ring sensing is automatically activated when the cooking zone is switched on. Electronic sensors are fitted under the cooking zones. These detect: –the material that the pan is made of, –the size of the base of the pan. - Page 21 Switching on and off the triple ring or casserole zone (when pan and triple ring sensing is switched off): 1. Select the cooking zone using the appropriate cooking zone selection button and set the desired heat setting. 2. Press the “Triple Ring Zone/Casserole Zone button The middle ring is switched on.
-
Page 22: Tables And Tips
Tables and Tips Tables and Tips Pans The better the pan, the better the results. • You can recognise good quality pans by the base of the pan. • The base should be as thick and flat as possible. Rough bases (e.g. on cast iron pans) will scratch the cooking surface when slid. -
Page 23: Tips For Cooking With And Without The Automatic Warm Up Function
You will waste energy if the... Pan is too small Tips for cooking with and without the automatic warm up function The automatic warm up function is suitable for: • dishes that start off cold, are heated up at a high setting and do not need to be continually watched when cooking, •... -
Page 24: Typical Heat Settings
Tables and Tips Typical Heat Settings The figures given in the following tables are for guidance only. Exactly which heat setting needs to be used depends on the quality of the pans and the type and quantity of the food. Table: Cooking and Frying Automatic Warm Up... -
Page 25: Cleaning And Care
Cleaning and Care Ceramic glass cooking surface It is important to clean the cooking surface after each use! Important! Never use aggressive cleaners such as, for example, coarse scouring cleaners or pan cleaners that scratch. 1. Always clean the cooking surface after each use. Use a damp cloth and a little washing up liquid. -
Page 26: Stubborn Soilage
Cleaning and Care Stubborn Soilage Residues from food that has boiled over First soften these using a wet cloth and then remove residues using a glass scraper. Caution! Take care when using a glass scraper! Then clean the cooking surface with the recommended cleaners. - Page 27 Spots Scale, shiny pearl like spots, metallic iri- descent coloured spots, and food rem- nants from pans that have formed during cooking are best removed when the cooking zones are still warm. Use the cleaners and polishes recom- mended. If necessary, clean more than once.
-
Page 28: What To Do If
What to do if ... What to do if ... A fault may have been caused by a minor operating error, which you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case. - Page 29 ... the cooking zones do not heat up, even though the displays are working? Check whether – demonstration mode has been activated accidentally. To deactivate this mode, ensure that the appliance is switched off and that the control panel is not locked. Then proceed as follows: 1.
- Page 30 ... f is shown in the display? Check whether –a pan that is too small is on the cooking zone. –the cooking zone has been overheated. If a cooking zone button is pressed and the pan on the cooking zone is too small, f (Fault) appears in the display.
-
Page 31: Service And Spare Parts
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to pur- chase spare parts, contact your local AEG Service Force Centre by tele- phoning Your call will be automatically routed to the Service Centre covering your post code area. -
Page 32: Guarantee Conditions
What to do if ... GUARANTEE CONDITIONS Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar docu- mentation. -
Page 33: Installation Instructions
INSTALLATION INSTRUCTIONS Important! This appliance must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Technical Data Appliance Dimensions Width Depth Height... -
Page 34: Regulations, Standards, Directives
Regulations, Standards, Directives Regulations, Standards, Directives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 in respect of the safety of electrical appliances for household use and similar purposes and • DIN 44546 / 44547 / 44548 in respect of properties of electrical cookers for the household. -
Page 35: Installing And Connecting Up
Installing and Connecting Up Installing Important: The new appliance is only to be installed and connected up by an approved installer. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. The veneer or plastic coverings on kitchen units around the appliance must be bonded with heat resistant adhesive (100 °C). - Page 36 Installing and Connecting Up The separation between the hob and the extractor hood must be at least as large as that given in the extractor hood installation instruc- tions.
- Page 37 • On tiled work surfaces, the joints in the area where the hob sits must be completely filled with grout. • On natural stone, synthetic stone, or ceramic surfaces, the snap- action springs can be bonded in place. • Ensure that the seal is correctly seated in the frame and that it is seated against the work surface without leaving any gaps.
-
Page 38: Electrical Connection
Installing and Connecting Up Electrical connection Assembly and connection of the new appliance may only be performed by an approved installer. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Attention! Only the cable fitted to the cooking surface recess may be used for connecting up the appliance. - Page 39 Installing and Connecting Up...
- Page 40 Hier Typschild aufkleben! (nur für Werk) AEG Hausgeräte GmbH Postfach 1036 D-90327 Nuremburg http://www.aeg.hausgeraete.de © Copyright by AEG ANC 822 947 296 -03- 0899...