Advertisement
Product specific problems
Problem
What you
experience
Screen image is
Image is
too small
centered on
screen, but
does not fill
entire viewing
area
Cannot adjust
OSD does not
the monitor
appear on the
with the
screen
buttons on the
front panel
No Input Signal
No picture, the
when user
LED light is
controls are
white
pressed
The picture
The picture
does not fill the
cannot fill the
entire screen
height or width
of the screen
5. Trouble Shooting Instructions
Possible solutions
• Check the Aspect Ratio setting in the Display
menu OSD.
• Reset the monitor to factory settings.
• Turn off the monitor, unplug the monitor power
cable, plug it back, and then turn on the monitor.
• Check the signal source. Ensure the computer
is not in the power saving mode by moving the
mouse or pressing any key on the keyboard.
• Check whether the signal cable is plugged
in properly. Connect the signal cable again, if
necessary.
• Reset the computer or video player.
• Due to different video formats (aspect ratio) of
DVDs, the monitor may display in full screen.
• Run the built-in diagnostics.
Advertisement
