Dell S2722DZ Instructions Manual

1
DELL S2722DZ
1. Disassembly Procedures:
S1 Open the carton with a proper tool.
Take out all accessories including label(optinal), QSG,
USB Type-C cable, power cable, manual and other
S2
packing materials from the carton. (Note: It depends
on whether users returning the accessories)
power cable
USB Type-C cable
manual
Take out the base and molded pulp from the carton,
S3
then take out the monitor and stand from the carton.
monitor
Take out the monitor from EPE-bag and put the LCD
S4
monitor on a protective cushion.
QSG
base
stand
Use a Philips-head screwdriver to remove 4pcs
S5
screws for unlocking rear cover with the assembled
unit.
(No.1~4 screw size=M4x11; Torque=11
2
4
Wedge your fingers between rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S6
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover. Remove the
rear cover and put it aside.
2
Tear off 2pcs aluminum foils, disconnect the Mic wire
and speaker's cable away from the connectors of the
S7
interface board. Use a Philips-head screwdriver to
remove 6pcs screws for unlocking the two speakers.
(No.1~6 screw size=M3x3.5, Torque=3~4 kgfxcm)
1kgfxcm)
±
3
1
1
2
3