Electrical Safety; Package Contents - DeWalt DWE46106 Original Instructions Manual

English
• Health hazards caused by breathing dust developed when
working in concrete and/or masonry.

Electrical Safety

The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with EN60745; therefore no earth wire is required.

WARNING: 115 V units have to be operated via a fail-safe
isolating transformer with an earth screen between the
primary and secondary winding.
Cord shall only be replaced by DEWALT service agencies.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.

Package Contents

The package contains:
1 125 mm diamond wheel
1 Cut-off tool
1 Side handle
1 Hex wrench
1 Cutting shroud
1 Locking flange
1 Backing flange
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
8
Wear eye protection.
Date Code Position (Fig. A)
The date code 19
is printed into the housing of the cut-off tool and shroud.
Example:
Description (Fig. A, B)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Slide switch
1
Spindle lock button (Fig. B)
2
Spindle
3
Side handle (Fig. B)
4
Variable speed dial
5
Dust ejection system
6
Swiveling dust port
7
Collar screw
8
Metal base
9
Depth of cut adjustor
10
Intended Use
Your cut-off tool with cutting shroud has been designed for
professional masonry cutting applications. It is not intended for
use with metal or wood. It may used only for dry cutting. Using
; the
2
the appropriate diamond wheel and dust extractor vacuum can
be used to remove the vast majority of static and airborne dust
which without the use of the cutting shroud could otherwise
contaminate the working environment or pose an increased
health risk to the operator and those in close proximity.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
The cut-off tool with cutting shroud is a professional tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Anti-vibration Side Handle
The anti-vibration side handle offers added comfort by
absorbing the vibrations caused by the tool.
, which also includes the year of manufacture,
2020 XX XX
Year of Manufacture
Depth of cut adjustment
11
knob
Removable wheels
12
Front shroud button
13
Side shroud button
14
Upper shroud
15
Lower shroud
16
Locking flange
17
Backing flange
18