Configuration Mode - Dräger Babytherm 8004 Operating Instructions Manual

Operation

Configuration Mode

Configuration Mode
Possible Activities
Code Activity
c01 Displaying current software version
c02 Selecting skin temperature alarm threshold
c03 Adjusting speaker volume for alarms
c04 Hours of operation, phototherapy
c05 Testing control panel keys
c06 Testing nurse call
c07 Selecting language
c08 Adjusting display contrast
Err Error reporting
NOTE: The control panel keys and displays have a
different purpose/meaning than in radiant heater
operation mode!
1 Activate/cancel configuration mode
2 Information regarding current activity
3 Abbreviation of current activity
4 Code of current activity
5 Advance to / back to activity
6 Increase/decrease values for activity selected
7 Activate/leave error reporting mode
8 State changes within activities
9 Display setting for current activity
Activating configuration mode
1 Keep »OK«-button pressed for 3 seconds.
A brief alert sound is generated.
2 Display message:
Configuration mode
Press OK-button to start.
1 Press OK button again. A brief alert sound is
generated. Configuration mode is now active.
The device defaults to activity »c01« and displays the
current software version
Displaying the software version
1 Display message:
Configuration mode
Mode c01: Software version.
2 The current software version is displayed, e.g.: 1.00.
3 The current activity code c01 is displayed.
44
2
9
10
3
5
4
1
skin °C
manual mattress.°C
7
skin
man.
5 6
2
10
5
1
skin °C
manual mattress.°C
skin
man.
1
10
2
5
3
1
skin °C
manual mattress.°C
skin
man.
Babytherm 8010
15 min
°C
8
< 36°C
1
Babytherm 8010
15 min
°C
< 36°C
1
Babytherm 8010
15 min
°C
< 36°C