Connecting An Rgb Video Source - Epson PowerLite 4100 User Manual

note
Be sure your video player is
not a component video
source. If you select the
wrong source, image quality
may suffer. Check your
video player's
documentation.
Setting Up the Projector
22

Connecting an RGB Video Source

Connecting Using a VGA Computer Cable
1. Locate the VGA computer cable provided with the projector.
2. Connect the cable to the video port on your player and
the port on the projector.
Computer1
3. You may need to change the
projector's Signal menu to
4. When you've finished making any connections, see page 23 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
setting in the
Input Signal
(see page 59).
RGB