Standard Fuse (10A)-Model 31654; Mini Fuse (10 A)-Models 31657 And 31659 - Toro LT2240 Installation Instructions Manual

8
Connecting the Electrical
Components
Parts needed for this procedure:
1 Standard fuse (10A)—Model 31654
1 Mini fuse (10 A)—Models 31657 and 31659
Model 31654
1. Locate the connector labeled AIR-RIDE on the
seat behind the rubber boot.
Locate the air-ride seat connector on the main
wire harness breakout and install the connector.
Note:
The breakout of the main wire harness
is located by the seat.
2. Connect the seat-switch connector.
3. Remove the cover from the fuse block
27).
Figure 27
1. Fuse-block cover
4. Insert the standard fuse (10 A) into the 5th fuse
position from the left
block as follows:
Note:
1. Standard fuse (10 A)
5. Install the cover on to the fuse block
(Figure
g037069
19
(Figure 28) of the fuse
Ensure that the fuse is fully seated.
Figure 28
2. Fuse-block socket (5th
slot from the left)
g037201
(Figure 27).