Sharp VL-AX1S/H Service Manual page 5

3.
• Detach the 3 main=sub FPCs (1, 2 and 3) and 1 microphone
connector.
• Remove the 1 screw ((R)XiPSN17P03000) and 2 screws
((N)XiPSF17P02000), and pull out the sub PWB in the direc-
tion of the arrow.
4.
• Detach the lens FPC, focus FPC, and camera=main FPC
BtoB.
• Remove the 1 screw ((R)XiPSN17P03000), raise the claw,
and then pull out the lens section in the direction of the arrow.
5.
• Detach the head amp=main FPC BtoB, battery terminal FPC
BtoB, AV/S terminal unit FPC, and power supply S/S unit FPC.
• Remove the 3 screws ((R)XiPSN17P03000).
• Pull out the main PWB in the direction of the arrow to detach
the VF FPC. (If the main PWB is pulled out by force, the FPC
may be cut off. Therefore, pull it our gently.)
(R)
Microphone connector
Claw
Power supply S/S unit FPC
(R)
Head amp=Main FPC BtoB
VF FPC
AV/S terminal unit FPC
5
VL-AX1S/H/E/EW/EX
Sub PWB
(N)
(N)
Main=Sub FPC
Focus FPC
Lens FPC
(R)
Camera=Main FPC BtoB
(R)
(R)
Main PWB
Battery terminal FPC BtoB