Bissell SPINWAVE 2240F Quick Start Manual

•
Press power on a fully charged unit - a full blue light will turn on
o
If only part of the light turns on and the pads spin then turn off, the machine need to
be charged (When plugged in the blue indicator light flashes and fills until fully charged, if not test a
different working outlet)
•
If the pads don't spin and the light is blinking, this indicates the pads stopped spinning from:
•
o
Pushing down or stepping on the foot
o
Using on carpet or rugs
o
Using without pads on bare floors
•
Recline machine within 10 seconds - power turns off after 10 seconds when upright to save battery
power
•
Hold spray button
If it is not charging:
•
Unplug machine
•
Run hand along entire length of power cord, it should be smooth
•
Check plug for damage
o
If either the cord (not smooth or exposed wires) or plug (prongs) are damaged, visit a BISSELL
Authorized Service Center or Contact Us