Download Print this page
TRANZSPORTER TP250 Assembly Instructions Manual

TRANZSPORTER TP250 Assembly Instructions Manual

Carriage
Hide thumbs Also See for TP250:

Advertisement

Quick Links

TP250
(Pages 1-4)
Carriage Assembly Instructions
Failure to follow the instructions and safety precautions in this manual can result in serious
injury or death. Keep this manual in a safe location for future reference.
Congratulations
You've purchased a roofing hoist manufactured by TIE DOWN ENGINEERING. All of hoist products are easy to
assembly and is solidly built in USA and tested to ensure years of service.
Before You Begin
We've included this easy to use instruction sheet to ensure quick, easy assembly of your carriage
platform. Be sure to read the instructions (a time saver in the long run). Identify all parts and hardware.
Questions?
We're here to help, just call 800-241-1806. For faster service, have your model and serial number
ready when calling.
Instruction Sheet #08290 Rev. 11-23-20
Read this manual before using this product.
www.tranzsporter.com
TP400
(Pages 5-8)
404-344-0000 • www.tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
sales@tiedown.com
WARNING: This product can expose you to
chemicals including Nickel, which is known to
the State of California to cause cancer. For more
information go to: www.P65Warnings.ca.gov
E1563

Advertisement

loading
Need help?

Need help?

Do you have a question about the TP250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TRANZSPORTER TP250

  • Page 1 TP250 TP400 (Pages 1-4) (Pages 5-8) Carriage Assembly Instructions Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death. Keep this manual in a safe location for future reference.
  • Page 2 TP250 Carriage Parts Description List (TP400 on page 5) Plywood Brackets Platform Back/Flap Description Qty. Platform Back Flap Platform Base Carriage Base Support Struts w/Pins Plywood Brackets w/Pins 5/16”-18 x 2” Bolt Platform Base 5/16” Nyloc Nuts Support Struts Carriage Base...
  • Page 3 TP250 Carriage Assembly Instructions Beveled End Step #3 Support Strut Round End Lift up one side of the carriage 90˚ and let it rest on its side. Platform Back/Flap Place the round end of the support strut in the platform...
  • Page 4 Step #7 You have completely assembled the TP250 Carriage unit. Please proceed to the TP250 Operations Manual for further instructions. Page 4 of 8 404-344-0000 • tiedown.com 605 Stonehill Drive SW, Atlanta, GA 30336...
  • Page 5 TP400 Carriage Assembly Instructions Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death. Keep this manual in a safe location for future reference.
  • Page 6 TP400 Carriage Parts Description List Description Qty. Platform Back/Flap Platform Back Flap Platform Platform Base Base Carriage Base Support Struts w/Pins Plywood Brackets w/Pins 5/16”-18 x 2” Bolt 5/16”-18 x 1” Bolt Carriage Base 5/16” Nyloc Nuts Support Strut TP400 Carriage Assembly Instructions Pivot Tab Holes Lift This...
  • Page 7 TP400 Carriage Assembly Instructions Carriage Base Step #3 Flip the carriage base over so that it lays flat on top of the carriage base Align the platform back/flap tap holes with the carriage holes. Platform Back Flap Insert 5/16”x 1” bolt through back/flap Platform tap holes and carriage base, Tighten nylock nut Base...
  • Page 8 TP400 Carriage Assembly Instructions Plywood Brackets Safety Pins Plywood brackets used when Plywood brackets in position for handling panel goods. transport or storage. Step #5 Flip the completed base over. Insert the plywood brackets into slots on the front of the Platform base. If you plan to use the plywood brackets insert the short end into the slots with the long end 90˚...

This manual is also suitable for:

Tp400