Care And Cleaning; Troubleshooting Guide - KitchenAid 5KHBV53A Manual

Corded hand blender
Table of Contents

Advertisement

CARE AND CLEANING

IMPORTANT: Always unplug the Hand Blender before attaching or removing parts.
1
Dishwasher safe parts - top rack only:
Blending jar, Blending Arm, Lid, and Pan
Guard in the top rack.
For detailed information on the Hand Blender:
Visit
www.KitchenAid.com.au
and tips on how to use and clean your Corded Hand Blender.

TROUBLESHOOTING GUIDE

Plug into an earthed outlet.
Do not remove an earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, re,
or electrical shock.
Problem
If the Hand Blender fails to
start:
If the Hand Blender stops while
blending:
If the problem cannot be
corrected:
W11419342B.indd 7
W11419342B.indd 7
2
Wipe the Motor Body with a damp cloth.
Mild dish soap may be used, but do not
use abrasive cleansers.
for additional instructions with videos, inspiring recipes,
WARNING
Electrical Shock Hazard
Check to see if the Hand Blender is securely plugged
into an earthed electrical outlet.
If you have a circuit breaker box, check to make sure
that the circuit is closed.
When overloaded or jammed, it will automatically shut
off to prevent motor damage. Divide contents into
smaller batches. For certain recipes, adding liquid in
the Jar may also reduce the load.
See the "Customer Service" section.
Do not return the Hand Blender to the retailer.
Retailers do not provide service.
Solution
9/30/2020 7:24:09 PM
9/30/2020 7:24:09 PM
7

Advertisement

Table of Contents
loading

Table of Contents