installing your dryer
UNPACKING YOUR DRYER AND INSTALLING GUIDE
Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup,
adjustment, and connection, it is considered the responsibility of the installer. It is recommended that a
professional is called to install this appliance, especially for more diffi cult installations involving draining to the
mains water supply or product stacking. If problems of installation result in a service visit to fi x a fault, this is
typically considered to be the responsibility of the installer.
Make sure you have everything necessary for proper installation (AC 220~240V/50Hz).
A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements (See page 11).
SEE DRYER EXTERIOR
Cover Top
Water tank
Filter case
Levelling feet
Parts
Hose guide
Cable tie
Hose
Long drain hose (2m)
connector
English - 9
Control panel
Door
Manual
Rack Dry
book
(9 Series)