Advertisement
INSTALLATION
INSTALLATION
07
Levelling the washing machine
Levelling the washing machine
Warning!
Warning!
！ ！
！ ！
• The lock nuts on all four feet must be screwed tightly against the housing.
• The lock nuts on all four feet must be screwed tightly against the housing.
INSTALLATION
Check if the legs are closely attached to the cabinet. If not, please turn them to
Check if the legs are closely attached to the cabinet. If not, please turn them to
1.
1.
their original positions tighten the nuts.
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
Levelling the washing machine
N
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
CONNECTING THE WATER SUPPLY HOSE
Warning!
！ ！
ashing machine
hing machine
WARNING:
• The lock nuts on all four feet must be screwed tightly against the housing.
•
To prevent leakage or water damage, follow the
instructions in this chapter!
Check if the legs are closely attached to the cabinet. If not, please turn them to
1.
N
four feet must be screwed tightly against the housing.
all four feet must be screwed tightly against the housing.
•
Do not kink, crush, modify or sever water inlet hose.
their original positions tighten the nuts.
•
For models which equips hot valve, connect it to
sely attached to the cabinet. If not, please turn them to
closely attached to the cabinet. If not, please turn them to
Connect Water Supply Hose
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
Connect Water Supply Hose
hot water tap with hot water supply hose. Energy
ns tighten the nuts.
ighten the nuts.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
ashing machine
consumption will decrease automatically for some
Warning!
Warning!
！ ！
！ ！
n the feet until it closely contacts with the floor.
urn the feet until it closely contacts with the floor.
programs.
• To prevent leakage or water damage, follow the instructions in this chapter
• To prevent leakage or water damage, follow the instructions in this chapter
ock them with a spanner, make sure the machine is steady.
them with a spanner, make sure the machine is steady.
•
Do not kink, crush, modify or sever
•
Do not kink, crush, modify or sever
2
2
Connect the inlet pipe as indicated.
• For the model equips hot valve,connect it to hot water tap with hot water supply
• For the model equips hot valve,connect it to hot water tap with hot water supply
all four feet must be screwed tightly against the housing.
There are two ways to connect the inlet pipe:
hose. Energy consumption will decrease automatically for some program.
hose. Energy consumption will decrease automatically for some program.
closely attached to the cabinet. If not, please turn them to
1.
Connection between ordinary tap and inlet hose.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
ns tighten the nuts.
Lower
Lower
Raise
Raise
1.Connection between ordinary tap and inlet hose.
1.Connection between ordinary tap and inlet hose.
urn the feet until it closely contacts with the floor.
Connect Water Supply Hose
ock them with a spanner, make sure the machine is steady.
upply Hose
Supply Hose
2
Warning!
！ ！
or water damage, follow the instructions in this chapter
ge or water damage, follow the instructions in this chapter
• To prevent leakage or water damage, follow the instructions in this chapter
modify or sever
h, modify or sever
water inlet hose
water inlet hose
clamp nut
•
Do not kink, crush, modify or sever
uips hot valve,connect it to hot water tap with hot water supply
s hot valve,connect it to hot water tap with hot water supply
• For the model equips hot valve,connect it to hot water tap with hot water supply
Loosen clamp nut and
Loosen clamp nut and
mption will decrease automatically for some program.
sumption will decrease automatically for some program.
Loosen clamp nut
four bolts
four bolts
hose. Energy consumption will decrease automatically for some program.
Raise
and four bolts
indicated, There are two ways to connect the inlet pipe.
as indicated, There are two ways to connect the inlet pipe.
Supply Hose
2.Connection between screw tap and inlet hose.
2.Connection between screw tap and inlet hose.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
n ordinary tap and inlet hose.
dinary tap and inlet hose.
1.Connection between ordinary tap and inlet hose.
2
2
slide bushing
slide bushing
ge or water damage, follow the instructions in this chapter
h, modify or sever
water inlet hose
uips hot valve,connect it to hot water tap with hot water supply
sumption will decrease automatically for some program.
Tap with threads and inlet hose
Tap with threads and inlet hose
hten clamp nut
Tighten clamp nut
Press slide bushing,
Press slide bushing,
Press slide bushing,
insert inlet hose into
insert inlet hose into
insert inlet hose
connecting base
connecting base
as indicated, There are two ways to connect the inlet pipe.
Loosen clamp nut and
into connecting
ordinary tap and inlet hose.
crew tap and inlet hose.
n screw tap and inlet hose.
four bolts
base
2
2.
Connection between screw tap and inlet hose.
2.Connection between screw tap and inlet hose.
Special tap for washing machine
Special tap for washing machine
d inlet hose
let hose
Tighten clamp nut
Press slide bushing,
9 9
9 9
insert inlet hose into
connecting base
Tap with threads and inlet hose
Tap with threads and inlet hose
n screw tap and inlet hose.
d inlet hose
Special tap for washing machine
9 9
INSTALLATION
Connect the other end of inlet pipe to the inlet valve at the backside of produc
and fasten the pipe tightly clockwise.
water Inlet valve
1
1
2
2
Raise
Raise
Drain Hose
1
water inlet hose
3
3
4
4
•
• Position drain hose properly ,otherwise damage might result of water leaka
Lock nut
Lock nut
foot
foot
Raise
There are two ways to place the end of drain hose:
1
2
1
1
2
2
1.Put it into the water trough.
3
!
!
.
.
clamp nut
Tighten clamp nut
Tighten clamp nut
Press slide bushing,
Tighten clamp nut
insert inlet hose into
Lower
connecting base
3
4
3
3
4
4
1
.
Connection finished
Connection finished
Connection finished
clamp nut
•
9 9
Tighten clamp nut
3
slide bushing
slide bushing
slide bushing
Connection finished
•
• If drain hose is too long, do not force it into washing machine as it will ca
slide bushing
Special tap for washing machine
inalto.house
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
Connect the other end of inlet pipe to the inlet valve at the back
Connect the other end of inlet pipe to the inlet valve at the backside
and fasten the pipe tightly clockwise.
and fasten the pipe tightly clockwise.
Connect the other end of inlet pipe to the inlet valve at the backside of product
Connect the other end of inlet pipe to the inlet valve at the backside of prod
3
3
water Inlet valve
and fasten the pipe tightly clockwise.
and fasten the pipe tightly clockwise.
water Inlet valve
water Inlet valve
water Inlet valve
Lower
Lower
Connect the other end of inlet pipe to the inlet valve at the
Drain Hose
backside of product and fasten the pipe tightly clockwise.
Warning!
Warning!
Drain Hose
3
2
！ ！
！ ！
water inlet hose
.
.
Drain Hose
Drain Hose
THE DRAIN HOSE
Warning!
Warning!
Do not kink or protract the drain hose.
！ ！
！ ！
•
Warning!
Warning!
Warning!
Warning!
！ ！
！ ！
！ ！
！ ！
•
Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might resul
WARNING:
• Position drain hose properly ,otherwise damage might result of w
•
Do not kink or protract the drain hose
•
Do not kink or protract the drain hose.
•
Do not kink or protract the drain hose.
Lower
•
Position drain hose properly, otherwise damage might
• Position drain hose properly ,otherwise damage might result of water leakage.
• Position drain hose properly ,otherwise damage might result of water le
There are two ways to place the end of drain hose:
result of water leakage.
3
3
There are two ways to place the end of drain hose:
1.Put it into the water trough.
slide bushing
slide bushing
1.Put it into the water trough.
There are two ways to place the end of drain hose:
There are two ways to place the end of drain hose:
There are two ways to place the end of drain hose:
4
1.Put it into the water trough.
1.Put it into the water trough.
Lock nut
water inlet hose
.
Press slide bushing,
Connection finished
Connection finished
foot
insert inlet hose into
connecting base
Water
Water
slide bushing
slide bushing
trough
trough
Water
Water
3
2
trough
slide bushing
trough
!
Note!
•
Note!
Note!
Note!
NOTE:
Special tap for washing machine
Special tap for washing machine
•
If the machine has
•
If the machine has drain hose support, please install it
If the machine has
drain hose support, please install it like the following
•
If the machine has
•
If the machine has
9 9
like the following:
Press slide bushing,
insert inlet hose into
connecting base
4
Warning!
！ ！
•
Warning!
Warning!
！ ！
！ ！
•
When installing drain hose, fix it properly with a rope.
• If drain hose is too long, do not force it into washing mach
WARNING:
Warning!
！ ！
• If drain hose is too long, do not force it into washing machine as
•
When installing drain hose, fix it properly with a rope.
•
When installing drain hose, fix it properly with a rope.
•
When installing drain hose, fix it properly with a rope.
abnormal noises.
• If drain hose is too long, do not force it into washing machine as it will cause
• If drain hose is too long, do not force it into washing machine as it will
•
If drain hose is too long, do not force it into washing
When installing drain hose, fix it properly with a rope.
Special tap for washing machine
machine as it will cause abnormal noises.
abnormal noises.
abnormal noises.
9 9
abnormal noises.
water supply hose
4
4
water supply hose
water supply hose
Lock nut
Lock nut
water supply hose
water supply hose
foot
foot
4
!
!
Warning!
Warning!
！ ！
！ ！
Do not kink or protract the drain hose.
Lock nut
foot
4
4
2.Connect it to the branch drain pip
the trough.
2.Connect it to the branch drain pipe of
!
the trough.
Water
trough
4
Note!
If the machine has
drain hose support, please install it like
drain hose support, please install it like the f
drain hose support, please install it like the following .
drain hose support, please install it like the followi
Connection finished
Warning!
slide bushing
！ ！
When installing drain hose, fix it properly with a rope.
abnormal noises.
10
10
10
10
10
10
2.Connect it to the b
2.Connect it to the branch
the trough.
the trough.
2.Connect it to the branch drain
the trough.
Trough
Trough
Hose Retainer
Trough
Trough
Trough
Hose Retainer
Hose Retainer
Max.100cm
Hose Retainer
Min.60cm
Max.100cm
Min.60cm
Max.100cm
Max.100cm
Min.60cm
Min.60cm
Max.100cm
Min.60cm
10
10
10
10
Hose Ret
Advertisement
