Page 1
6/8KG TOP LOAD MODELS WASHING MACHINE ITLWG6/8 USER MANUAL V 1.0 ITLWG6-8_Manual_V1.0.indd 1 8/5/19 1:27 pm...
Page 2
It is important that you read through the following use and care manual thoroughly to familiarise yourself with the installation and operation requirements of your appliance to ensure optimum performance. Again, thank you for choosing an InAlto appliance and we look forward to being of service to you. Kind Regards, The Residentia Team ITLWG6-8_Manual_V1.0.indd 2...
11. Turn off the water supply • Although the washing machine would be switched off, the power outlet should be switched off and the plug should be pulled out for safety reasons. ITLWG6-8_Manual_V1.0.indd 4 8/5/19 1:27 pm...
Page 5
Upper drain hose (for upper drain only) Power cord/plug Power cord/Plug Top lid Frame Control Panel Handle Cabinet Drain hose (for lower drain only) Adjustable feet Adjustable Feet Washing powder INTERIOR Liquid detergent Fabric Softner ITLWG6-8_Manual_V1.0.indd 5 8/5/19 1:27 pm...
If the power cord is damaged, it must be replaced by Residentia Group or one of it’s authorised service representatives. Please contact 1300 11 HELP (4357) and ensure the appliance is completely disconnected from the power supply. INSTALLATION OF DRAIN HOSE ITLWG6-8_Manual_V1.0.indd 6 8/5/19 1:27 pm...
Page 7
Always ensure coins, keys and other hard goods are removed from items of clothing before washing, as they can cause damage to the barrel. It is recommended to zip up clothes for the same reason. ITLWG6-8_Manual_V1.0.indd 7 8/5/19 1:27 pm...
Page 8
1 hour, up to 24 hours, there after delaying by 6 hours with each press up to 48 hours. To switch the delayed start off, simply press the button until it returns to 1. ITLWG6-8_Manual_V1.0.indd 8 8/5/19 1:27 pm...
Page 9
When both the Hot and Cold indicators are lit, your the programs to the left, whereas a flashing indicator indicates the programs washing machine will be set to use Warm water. to the right. ITLWG6-8_Manual_V1.0.indd 9 8/5/19 1:27 pm...
Page 10
This product is subject to continuous improvement, specification are subject to change without prior notice. This product was tested in accordance with AS/NZS 2040.2 and AS/NZS6400 using program: Standard, which is the program recommended for a normally soiled cotton load at rated capacity. ITLWG6-8_Manual_V1.0.indd 10 8/5/19 1:27 pm...
Page 11
AUTOMATIC ADJUSTMENT FOR IMBALANCE If the laundry is placed unevenly within the drum, it is likely to cause vibration during spinning. Your InAlto washing machine has a built in function of adjusting for the imbalance. When the machine is adjusting for any imbalance, the rinse light will flash and normally takes around 1 minute.
User Manual Cleaning & Maintenance ITLWG6-8_Manual_V1.0.indd 12 8/5/19 1:27 pm...
Page 13
If all clothing piled largely at one side of barrel or the clothing is excessively placed. Abnormal spin • If the washer is not placed in stable condition or it is placed in inclination state. (The ground is not flat). • If the motor belt is loosened. ITLWG6-8_Manual_V1.0.indd 13 8/5/19 1:27 pm...
Page 14
Open the lid when entering into the child lock state. Imbalance Checked imbalance for "E3" flares alarm the third time. Alarm for water drain "E4" flares Drain alarm time out. ITLWG6-8_Manual_V1.0.indd 14 8/5/19 1:27 pm...
Appliances or parts become the property of Residentia Group. This warranty does not apply to light globes, batteries, filters or similar perishable parts. Parts and Appliances not supplied by Residentia Group are not covered by this warranty. ITLWG6-8_Manual_V1.0.indd 18 8/5/19 1:27 pm...
Page 19
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. ITLWG6-8_Manual_V1.0.indd 19 8/5/19 1:27 pm...
Page 20
S U P P O RT @ R E S I D E N T I A G R O U P. C O M . A U W W W. R E S I D E N T I A . G R O U P ITLWG6-8_Manual_V1.0.indd 20 8/5/19 1:27 pm...