Advertisement
15
MAINTENANCES
MAINTENANCES
CLEANING THE DRAIN PUMP FILTER
(REMOVING FOREIGN OBJECTS)
Cleaning The Drain Pump Filter
Cleaning The Drain Pump Filter
WARNING:
•
Be careful of the hot water!
•
Allow detergent solution to cool down.
Warning!
Warning!
！ ！
！ ！
•
Unplug the machine to avoid electrical shock
before washing.
•
•
Be careful of the hot water!
Be careful of the hot water!
Periodically you should clean the drain pump filter to ensure
•
•
Allow detergent solution to cool down.
Allow detergent solution to cool down.
normal operation of your washing machine. The type of
washing, frequency and soil level of your washing cycles
• Unplug the machine to avoid electrical shock before washing.
• Unplug the machine to avoid electrical shock before washing.
will alter how often this procedure needs to be undertaken,
• Drain pump filter can filter the yarns and small foreign matters from the
• Drain pump filter can filter the yarns and small foreign matters from the
however you should inspect the filter regularly.
washing.
washing.
Should your washing machine not empty and/or spin, or
• Clean the filter periodically to ensure the normal operation of washing
• Clean the filter periodically to ensure the normal operation of washing
your machine makes unusual noises during operation, your
Drain Pump filter could be blocked. Follow this procedure to
machine.
machine.
mp Filter
check or remove any foreign objects.
cool down.
cool down.
d electrical shock before washing.
d electrical shock before washing.
he yarns and small foreign matters from the
he yarns and small foreign matters from the
to ensure the normal operation of washing
to ensure the normal operation of washing
Open the Service filter
Open the Service filter
Open the service door
Caution!
Caution!
2
2
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak;
plates should be inserted aligning to hole plates otherwise water may leak;
• Some machines don't have emergency drain hose, Rotate lower cover cap directly
• Some machines don't have emergency drain hose, Rotate lower cover cap directly
to make water run into basin.
to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
be hot water in the pump. Never remove the pump cover during a wash cycle, always
by turning
Remove extraneous
by turning
Remove extraneous
wait until the appliance has finished the cycle, and is empty. When replacing the
wait until the appliance has finished the cycle, and is empty. When replacing the
Remove any foreign
lockwise
matter
lockwise
matter
objects or matter
cover, ensure it is securely re-tightened.
cover, ensure it is securely re-tightened.
emergency drain hose are reinstalled properly, cap
emergency drain hose are reinstalled properly, cap
ing to hole plates otherwise water may leak;
ing to hole plates otherwise water may leak;
ergency drain hose, Rotate lower cover cap directly
ergency drain hose, Rotate lower cover cap directly
nd depending on the programme selected there can
nd depending on the programme selected there can
er remove the pump cover during a wash cycle, always
er remove the pump cover during a wash cycle, always
1
1
1
。
。
Open the filter by turning
Open the filter by turning
Open the filter by turning
to the counter clockwise
to the counter clockwise
the filter counter clockwise
3
3
3
Close the lower cover cap
Close the lower cover cap
Close the lower cover cap
inalto.house
CAUTION:
•
Never remove the pump cover when the washing
machine is in operation, always wait until the appliance
has finished and the is empty. There can be hot water
within the pump, so be careful to avoid burns, should it
have operated recently. When replacing the cover, be
careful to ensure it is securely retightened.
•
Make sure that valve cap and emergency drain hose
are reinstalled properly, cap plates should be inserted
aligning to hole plates otherwise water may leak.
•
Some machines don't have emergency drain hose,
Rotate lower cover cap directly to make water run into
the basin.
2
2
2
Remove extraneous
Remove extraneous
matter
matter
4
4
4
3
3
Close the lower cover cap
Close the lower cover cap
4
4
Advertisement
