Making/Answering Calls; Making Calls; Answering Calls - Panasonic KX-TG7921E Operating Instructions Manual

Making calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press MCN.
2
Press M N.
3
When you finish talking, press MeN or
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN.
R Speak alternately with the other party.
2
When you finish talking, press MeN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press MZN/
M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1
MEN (T)
2
MbN: Select the desired phone number.
3
M N
Storing a number to the phonebook
1
MEN (T)
2
MbN: Select the desired phone number.
a M N a M
3
To store the name, continue from step 3,
"Adding entries", page 20.
Erasing a number in the redial list
1
MEN (T)
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
TG78xx_79xxE(en)_0407_ver112.pdf 17
N

Making/Answering Calls

2
MbN: Select the desired phone number.
a M N
3
MbN: "Yes" a MOKN a MeN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 21).
Example: If you need to dial the line access
number "0" when making outside calls with a
PBX:
1
0 a MDN (Pause)
2
Dial the phone number. a M
Note:
R A 3 second pause is inserted each time MDN
(Pause) is pressed.

Answering calls

1
Lift the handset and press M
when the unit rings.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
2
When you finish talking, press MeN or
place the handset on the base unit or
charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press M N. To turn this feature
on, see page 26.
Adjusting the handset ringer volume
n While the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
n Programming the volume beforehand:
1
M N (right soft key) #160
N
N or MZN
17
2015/04/07 11:32:51