Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
M
N (right soft key)
2
Press MCN, MDN, MEN, or MFN to select the desired main menu. a MOKN
3
Press MCN or MDN to select the desired item from the next sub-menus. a MOKN
4
Press MCN or MDN to select the desired setting. a MOKN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN.
n Using the direct command code
1
M
N (right soft key) a Enter the desired code.
Example: Press M
2
Select the desired setting. a MOKN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu:
"Answer System"
Sub-menu 1
Message List
Play New Msg.
(Msg.: message)
Play All Msg.
*1
Erase All Msg.
Greeting
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
TG78xx_79xxE(en)_0407_ver112.pdf 23
N (right soft key) #101.
indicates the reference page number.
Sub-menu 2
–
–
–
–
*1
Start REC
(Record greeting)
Play Greeting
*1
Default
(Reset to pre-recorded
greeting)
Programming
Settings
Code
–
#329
–
#323
–
#324
–
#325
–
#302
–
#303
–
#304
37
37
37
38
36
37
37
23
2015/04/07 11:32:51