Security Setup - Acrosser Technology ANR-J190N2-C612 User Manual

3.4.

Security Setup

Main
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and muste be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
Maximum length
Administrator Password
User Password
Once a password is effective, you have to enter the administrator password or user
password before you access into the BIOS setup interface.
• Administrator Password
This item allows you to configure an administrator Password. Press <Enter> to
create a new password, type the password, then press <Enter> again, and then you
will be require to type the password again for confirmation. At last, press <F4> then
<Enter> to save and reboot the system to make the password effective.
The administrator password allows you to make changes to all BIOS settings.
• User Password
This item allows you to configure a user Password. Press <Enter> to create a new
password, type the password, then press <Enter> again, and then you will be require
to type the password again for confirmation. At last, press <F4> then <Enter> to save
and reboot the system to make the password effective.
The user password only allows you to make changes to certain BIOS settings.
Note 1: The length of the password must be between 3~20 characters.
Note 2: To cancel the password, you must press <Enter> on the item (Administrator
Password / User Password) and type in the correct password first, then press
<Enter> without entering any password, and press <Enter> again as promotion
about password cleanup conformation.
34
ANR-J190N2-C612, ANR-J180N2-C612 User Manual
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced Chipset Security
Version 2.17.1246. Copyright (C) 2016 American Megatrends, Inc.
Boot Save & Exit
3
20
Set Administrator
Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Acrosser Technology Co., Ltd.