Download Print this page

Technical Data - Inalto CLASSIQUE IHPD7 User Manual

Heat pump dryer 7kg

Advertisement

15
MAINTENANCE

Technical Data

Technical Specifications
Model
IHPD7
MDS70-CH05/B08-AU(6)
Parameter
Dimension(L*W*H)
622*595*845(mm)
+5°c ~ +35°c
Ambient temperature
Rated input power
850W
Rated voltage
220-240V~
Rated frequency
50Hz
Refrigerant
R134a
Weight of product
51kg
Rated capacity
7.0kg
Contains fluorinated greenhouse gases covered by the Kyoto Protocol.
Hermetically sealed.
Note!
The rated capacity is the maximum capacity, make sure that the dry clothes which are
Note:
loaded to the appliance do not exceed the rated capacity each time.
1.
The rated capacity is the maximum capacity, make sure
Do not install the tumble dryer in a room when there is a risk of frost occurring. At
that the dry clothes which are loaded to the appliance
temperatures around freezing point the tumble dryer may not be able to operate
do not exceed the rated capacity each time.
properly.
2.
Do not install the tumble dryer in a room when there is a
There is a risk of damage if the condensate water is allowed to freeze in the pump,
risk of frost occurring. At temperatures around freezing
hoses and / or condensate water container.
point the tumble dryer may not be able to operate
properly.
3.
There is a risk of damage if the condensed water
is allowed to freeze in the pump, hoses and / or
condensed water container.
inalto.com.au
ECD7
MDS70-C05/B08-AU(2)
622*595*845(mm)
+5°c ~ +35°c
2000W
220-240V~
50Hz
41kg
7.0kg
20

Advertisement

loading