Advertisement
Operating Your Dryer
SELECTING THE PROGRAM
1.
Press the On/Off button ,when the working state LED
brighten up, rotate the program knob to select the
desired program.
2.
Select the Delay, or Anti-Crease functions for additional
option.
3.
Press the Start/Pause button.
PROGRAM START
The drum will keep rotating after the program start, the
working state LED will flash in sequence.
NOTE:
Occasionally, the drum might pause for approximately 40
seconds during the drying procedure, but the working state
LED will flash as per normal. The dryer is automatically
adjusting in this time and will continue operation.
PROGRAM END
1.
The drum will stop running after the program ends, the
working state LED will stay light and buzzer will ring.
The "Filter" and "Full" LED will remind user to clean the
filters and container. The dryer will start Anti-crease
function if user doesn't remove the load in time. Please
press On/Off key to cut off power and pull the plug out.
2.
Deal with the problem according to "Malfunction
display and solutions , if there is a unexpected stop
during the drying procedure and the dryer show
information.
User Manual
SPECIALTY DRYING FUNCTION
DELAY FUNCTION
1.
Load your laundry and make sure the machine door is
closed.
2.
Press the On/Off button,then to turn the program
selector knob and select a desired program.
3.
You can select the Anti-Crease function according to
your need.
4.
To press the Delay button.
5.
Continue to press the Delay to select the delay time.
6.
After the Start/Pause button is pushed, the dryer is
at the run condition. The drying procedure will be
automatically performed when the delay time is over.
7.
If you push the Start/Pause button again, the delay
function will be paused.
8.
If you want to cancel the "Delay" function, please press
the On/Off button.
ANTI-CREASE FUNCTION
At the end of the drying cycle, the anti-crease operation
time is 30 minutes (default) or 120 minutes (selected).
The Anti-Crease LED shall light when the anti-crease
function is selected. This function prevents the laundry from
creases. The laundry can be removed during the anti-crease
phase. Except Cool, Refresh, Warm 30' and Warm 60', all
the other program have this function.
CHILD LOCK
1.
This machine incorporates a special child safety lock,
which can prevent children from carelessly pressing
buttons or making the faulty operation.
2.
When the dryer is at the operation state, press the Anti-
Crease and Delay buttons at the same time for over 3
seconds to start child lock function. When child lock
function is set, the LED light and no button can effect
to the dryer except On/Off button. Under the start state
of the child lock, the Anti-Crease and Delay buttons
shall be pressed at the same time for over 3 seconds to
release the child lock function.
10
Advertisement
