Download Print this page
Inalto IVD7 User Manual

Inalto IVD7 User Manual

Vented dryer 7kg
Hide thumbs Also See for IVD7:

Advertisement

Quick Links

MODEL
IVD7
V 1.2
VENTED DRYER
7KG
USER MANUAL

Advertisement

loading

Summary of Contents for Inalto IVD7

  • Page 1 VENTED DRYER MODEL IVD7 USER MANUAL V 1.2...
  • Page 2 New Zealand Applico — Again, thank you for choosing an InAlto appliance and we look forward to being of Online service to you. http://applico.co.nz —...
  • Page 3: Table Of Contents

    I N A LTO. H O USE Contents Welcome Safety Instructions Technical Your InAlto Vent- Specifications ed Dryer Control Before First Panel Accessory Kit Installation Components Instructions Operation Cleaning & Instructions Maintenance Troubleshooting Purchase Details Warranty Information...
  • Page 4 USE R M A N UA L Safety Instructions GENERAL SAFETY INSTRUCTIONS DRYER SAFETY WARNING! Failure to follow these safety instructions could damage the clothes dryer or your clothes. You may then not be covered by warranty for this damage. Only plug this appliance directly into an AC power supply which is properly earthed and had the correct voltage.
  • Page 5 I N A LTO. H O USE Safety Instructions FIRE HAZARDS Some fabrics are not suitable for tumble drying. The following MUST NOT be placed in your dryer due to the risk of a fire or an explosion: • Item(s) that have been spotted or soaked with vegetable oil, cooking oil, suntan oil, linseed oil, salad oil, lubrication oil or grease.
  • Page 6 USE R M A N UA L Safety Instructions To remove the lint filter, open the dryer door and simply lift the plastic filter out from its housing. You can click the lint filter open to allow easy access to remove the lint. Ensure that the plastic filter is clicked closed again before replacing into your clothes dryer.
  • Page 7: Technical Specifications

    I N A LTO. H O USE Safety Instructions Caution! Fabric softeners or similar products should not be used in a tumble dryer to eliminate the effects of static electricity unless this practice is specifically recommended by the manufacturer of the fabric softener or product.
  • Page 8 USE R M A N UA L Your InAlto Vented Dryer Figure 3- A diagram showing the main components of your vented dryer. 1. Top-board 2. Control Panel 3. Door 4. Front Panel 7. Flex tube (only to rear 5. Side panel 6.
  • Page 9: Control Panel

    I N A LTO. H O USE Control Panel Your InAlto clothes dryer’s controls explained. Figure 4- The control panel for your vented dryer 1. Power button. 2. Start or Pause drying program. 3. Drying program selector (1 Hour, Synthetic, Cotton, Mixed Items) 4.
  • Page 10 USE R M A N UA L Before First Use Step 1. Power source and grounding The dryer employs alternative current with the rated voltage and frequency. When the voltage fluctuates between 6% of rated voltage, the dryer can work normally. Your clothes dryer should be on a dedicated power socket for both convenience and safety.
  • Page 11: Accessory Kit Components

    I N A LTO. H O USE Accessory Kit Components ACCESSORY KIT CONTENTS PART NAME IMAGE/DIAGRAM Dryness Anti-Cr ease Program Play/Pause Extra Cotton Standard Synthetic Light 1 Hour Figure 5- Contents of the Accessory Kit included with your vented dryer for wall hanging installation.
  • Page 12 USE R M A N UA L Installation Instructions Wall Hanging Installation Ma POWER SOURCE AND GROUNDING (Applicable to 6kg and 7kg models) It’s recommended to use the dryer on its own dedicated power outlet for both convenience and safety. The power outlet must be grounded.
  • Page 13 Fix the holder at the position of the two screws. I N A LTO. H O USE Installation Instructions (Cont.) Step 4: Drill holes for expansion bolts. The drill diameter is 14mm. Drill 4 holes according to the positioning paper When hang drawing (hole depth 60mm).
  • Page 14 USE R M A N UA L Installation Instructions (Cont.) Step 6: Fix the holder to the dryer machine. Place the unpackaged dryer machine on the floor. Unscrew the two screws at the back of the machine with a cross screwdriver. Take out the holder in the kit. Press the screws into the holes on the holder and then fasten them into the original screw holes.
  • Page 15: Operation Instructions

    I N A LTO. H O USE Operation Instructions QUICK START Ensure the dryer is switched on at the power outlet and add your wet clothes into the tumble drum. 2. Press the “Power” button to switch the dryer on. 3.
  • Page 16 USE R M A N UA L Operation Instructions (Cont.) DETAILED OPERATION Step 1: Preparation before drying • Clothes should be washed before use within the dryer. • Always ensure the same types of clothes are dried together. • Try to sort your clothes to be dried into load that take a similar time to dry (for example heavier items separate from light items).
  • Page 17 I N A LTO. H O USE Operation Instructions (Cont.) DETAILED OPERATION (CONTINUED) Program Functions Note: Maximum capacity for loads is based on the clothing when dry. Tip! At the completion of a drying program, the clothes dryer will circulate cold air. This ensures that your clothing is left at a temperature and that your clothes aren’t damaged.
  • Page 18 USE R M A N UA L Operation Instructions (Cont.) GENERAL HINTS • Never tumble dry the following: Delicate items such as net curtains, woollen, silk, fabric with metal trim, nylon tights, bulky materials such as blankets, eiderdown, sleeping bags, feather quilts and any item containing rubber foam or materials similar to foam rubber.
  • Page 19 I N A LTO. H O USE Cleaning and Maintenance By ensuring proper cleaning and maintenance of your Esatto Vented Dryer, you can ensure that it will have a long and fault free operation. WARNING! To avoid an electric shock, always unplug your dryer before cleaning. CLEANING THE FILTER •...
  • Page 20: Troubleshooting

    USE R M A N UA L Troubleshooting BASIC TROUBLESHOOTING Check the points listed here before you call for help, and make sure that you have followed the Important safety Instructions within this manual. PROBLEM POSSIBLE CAUSES My dryer will not start - Plug is not firmly in its power socket, or the power outlet is not switched - You have blown or tripped a fuse.
  • Page 21 I N A LTO. H O USE Troubleshooting (Cont.) POSSIBLE FAILURES Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out a service technician. Before contacting your local Customer Care team, please check possible cause of malfunction and solution listed below.
  • Page 22 USE R M A N UA L Attach your receipt to this page...
  • Page 23 I N A LTO. H O USE Purchase Details For future reference, please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. STORE DETAILS STORE NAME ADDRESS TELEPHONE...
  • Page 24 USE R M A N UA L Warranty Information AUSTRALIAN WARRANTY TERMS & CONDITIONS 1. IN THIS WARRANTY LAUNDRY APPLIANCES (a) ‘acceptable quality’ as referred to in clause 10 of this warranty has the same meaning referred to in the ACL; (b) ‘ACL’...
  • Page 25 I N A LTO. H O USE Warranty Information (Cont.) 5. You will bear the cost of transportation, travel and 10. For Appliances and services provided by Residentia delivery of the Appliance to and from Residentia Group or Group in Australia, the Appliances come with a its ASR.
  • Page 26 Simply visit the below website, or ask your retailer for be paid by you, regulated by the number of kilometres help: www.inalto.co.nz/register travelled beyond the 25km limit (50km return trip). Microwaves are to be delivered to the nearest authorised WARRANTY: service agent by the customer.
  • Page 27 I N A LTO. H O USE THIS PAGE IS INTENTIONALLY LEFT BLANK...
  • Page 28 USE R M A N UA L A N I N I T I AT I V E BY R E S I D E N T I A G R O U P T E L . 1 3 0 0 1 1 4 3 5 7 S U P P O RT @ R E S I D E N T I A G R O U P.

This manual is also suitable for:

Classique ivd7