Advertisement
Cleaning and routine maintenance
Cleaning & Maintenance
Empty the water container
1. Hold and pull out the water container
with two hands;
2. Tilt the water container, pour out the
condensed water into basin;
3. Install the
water container.
WARNING:
Empty the water container after each use, the programme will be paused and the Full
1.
LED will light if the water container is full during the drying process. After the container
emptyed, the dryer can be restarted by pressing
2.Do not drink the condensed water
3.Do not use the dryer without the water container
Clean the filter door
1.Open the door.
2.Take out the filter door.
3.Clean the filter door; wipe off the scrap threads
accumulated on the filter door.
4.Reinstall the filter door.
Clean filter base
(Only
1.Open the maintenance cover.
2.Unscrew both locking levers towardas each other.
3.Clean the filter base completely.
4.Re-insert the filter base!
5.Screw both locking levers.
6.Close the
maintenance cover
NOTE!
1.The fluff accumulated on the filter will block the air circulation,
which will cause the extension of drying time and energy consumption;
2.Do disconnect the power cord before cleaning!
3.Do not operate the dryer without the filter!
4.Clean the filter after each use to prevent lint accumulation inside the dryer.
Clean heat exchanger
As necessary, approx. once every 2 months, remove the fluff from
the heat exchanger using the sponge or soft brush.
When doing this, please use gloves.
Note: The fluff can be removed more easily if it is first
dampened e. g. with a laundry dampener.
.
MDS70-CH05/B08-AU(6)
)
until it locks into position.
Locking lever
(Only MDS70-CH05/B08-AU(6))
16
User Manual
Start/Pause
button.
【
】
Filter door
Cleaning a
Wash air con
Filter base
Maintenance cover
12
-Leave the dr
-Residual wa
cloth under t
1.Unlock th
2.Complete
3.Screw bo
4.Pool out
5.Clean the
6.Clean the
7.Re-insert
8.Unscrew
9.Cloth the
Please cl
months if
Do not da
1.Clean with
!
Do not ope
2.During dryi
but this doe
Advertisement
