OPERATION
Before first use, ensure all removable components have been thoroughly washed and dried.
Control Panel
Power:
•
Connect the power cord to a power outlet, the machine will emit a 'beep' and the
display will turn on.
•
Press the power button, the LCD will display "on" and the pasta maker will enter
standby mode
•
During operation pressing the power button will stop the pasta maker and return
back to standby mode.
Automatic Mode:
•
Depending on the amount of flour in the mixing bowl, press either the "1, 2 or 3
cups" button.
•
The pasta maker will start working and the LCD will display the countdown timer.
•
The pasta maker will knead the dough for 3 minutes before it starts the extruding
process.
•
The machine will stop automatically and display "---" once it has finished extruding.
The whole process is approximately 10 minutes.
Manual Mode:
•
If after running the Automatic mode, there is left over dough in the mixing bowl,
press the "Manual" button to extrude the remaining dough.
•
The LCD will display a 5 minute countdown timer.
IMPORTANT! Do not use this function before water and flour are mixed otherwise it may
cause the pasta maker to malfunction.