Advertisement
Cleaning the Extruding Discs
•
Unscrew the screw nut and remove the extrusion discs.
•
Leave it in a well-ventilated place for approximately 2 hours to dry.
•
After the dough is dry, gently tap the disc. Clean the disc using a mix of water and a
mild detergent.
•
Wipe the disc with a clean, dry cloth.
•
Place the extrusion disc in the storage.
Note:
It may be easier to allow any dough left on the parts to completely dry before cleaning.
Leave parts in a well-ventilated area or refrigerator for approximately 2 hours. Use the
scraper to remove the dried dough.
Advertisement
