Toto SW3024 Instruction Manual page 10

Temperature Adjustment
Three diff erent temperature levels (High, Medium, Low) and "OFF" setting can be selected.
˂The drawing is SW3074˃
Displaying the temperature level of the pressed button
Warm water temperature button
(When you want to adjust the warm water temperature)
Drying air temperature button
(When you want to adjust the drying air temperature)
Adjusting the temperature
1
Choose and press the button of the temperature that you want to set
from the , ,
• The current temperature level appears.
2
Press the button selected in step
temperature level illuminates.
The setting changes each time the button is pressed once
"OFF" "Low"
OFF
The "Drying" cannot be turned "OFF".
If the button is not pressed for about 10 seconds, the "Temperature adjustment" LED will go off , but the setting will be retained.
If the "Temperature adjustment" LED goes out before the setting is completed, start all over again at step 1.
<Settings complete>
●When the toilet seat does not get warm, or when the warm water is not warm enough, even after temperature adjustment.
➞Is the "Energy saver" set to "ON"? (Pages 20, 21)
18
Toilet Seat, Warm Water, Drying
Toilet seat temperature button
(When you want to adjust the toilet seat temperature)
When the seat temperature and the warm water
temperature are set
<Seat>
Lit
<Water>
.
1
repeatedly until a desired
"Medium" "High"
Lit
Lit
To turn the warm water temperature and toilet seat temperature "OFF"
●The "Drying" cannot be turned "OFF".
1
Select a temperature button you want to turn "OFF"
from
• The current temperature level appears.
2
Press the button selected in step
level is set to "OFF".
The setting changes each time the button is pressed once
"OFF"
Lit
OFF
(
All
LED's
<Settings complete>
When the seat temperature and the warm water
temperature are turned "OFF"
OFF
, and press it.
1
repeatedly until the temperature
"Low" "Medium"
Lit
)
<Seat>
<Water>
"High"
Lit
Lit
19