Braun ExactFit 3 Manual page 5

Display BUA6150
Hour
Month
Date
Inflation sign
Deflation sign
Irregular heart beat
symbol
Heart rate symbol
User A/ user B
symbol
Average symbol
How to select user A /user B
• Make sure the Product is in power off mode.
• Slide the user switch to user A or user B, the current user mode will flash on the LCD display.
The WHO/ESH indicator to evaluate blood pressure data
This device has a blood pressure level indicator established according to WHO
and the European Hypertension Society Guidelines (ESH). For every measurement
RED >
displayed on the screen, the cursor will indicate the blood pressure level with the
corresponding color code, from green to red. You can use this classification daily
ORANGE > to guide you to understand your blood pressure level. If you are really concerned
by the classification level, you should consult your doctor as soon as possible.
If your blood pressure reading is in the severe hypertension range with values of
YELLOW >
180 mmHg systolic or above, and/or 110 mmHg diastolic and above, and if you
find you have one or two readings in this range - please see your doctor straight
GREEN >
away.
6
Minute
Ante or Post Meridiem
Low battery indicator
Measuring error display
WHO indicator
Memory record
Setting month, date and time
a. Switch off the device for the date/time setting.
b. Press set button (4) to start the year setting, then the
"year" will blink on display. Press (3) to adjust year by
1 step.
c. Press set button (4) to start the month setting, then the
"month" will blink on display, user can press adjust
adjust month by 1 step.
d. Press set button (4) to start the day setting, then the
"day" will blink on display, user can press adjust
adjust day by 1 step.
e. Press set button (4) to start the hour setting, then the
"hour" will blink on display, user can press adjust
adjust hour by 1 step.
f. Press set button (4) to start the minute setting, then the
"minute" will blink on display, user can press adjust
to adjust minute by 1 step.
g. Press set button (4) to end all the date/time setting, all
blinking stops.
Note: Holding the adjust button will scroll the value.
Taking a measurement
Wrap the cuff around the arm (see "applying the arm cuff" section above).
1. Sit upright on the chair to have a correct posture.
2. Press and release start button (1), date/time and current user will be displayed.
3. Set user A/B switch (6) to A for user A or B for user B, LCD display will show user A or B symbol.
4. Press and release the start button (1), all icons on display will be shown for 2 seconds. Air
pressure will automatically pump up to certain pressure level and start measurement.
Do not move or talk in the midst of taking blood pressure measurement. During the measurement,
keep your legs uncrossed and feet flat on the floor.
5. After the air pressure has increased, the pulse is detected, the heart rate symbol
flashing.
6. LCD Display will show the results and WHO indicator arrow after measurement.
After using the device, turn it off by pressing the start button
1 minute.
Memory function
Your blood pressure monitor can store the latest 40 readings for each user.
Storing measurement data
After each blood pressure measurement, the systolic pressure, diastolic pressure, pulse rate and the
time & date of specific day will be automatically stored. Memory #01 is always the most recent one.
Once the memory is full, the oldest values will be overwritten.
M
Press memory button (2) to review the stored data. The last memory data (sys/dia/pul) with
measurement date/time, IHB and WHO indicator will show on LCD. Press memory button
to show the previous data. Ensure that the correct user; A or B, is selected before use.
This device is not intended as a substitute for regular check-ups by your doctor, please continue to
visit your doctor on a regular basis for a professional reading.
English
c.
A
D M
P
d.
A
D M
P
e.
(3) to A
D M
P
f.
A
D M
(3) to
P
g.
A
D M
P
(3) to
(3)
A
D M
P
A
D M
P
will start
A B
(1) or automatically after
A B
M
(2) again
7