Consumables And Accessories; User-Replaceable Parts - Epson Stylus Pro 7600 Product Information

EPSON Stylus Pro 7600 and 9600

Consumables and Accessories

Ink Cartridges
When you install the printer's first ink cartridges, it takes
about 10 minutes to initialize the printer. Do not interrrupt
this process by turning off the printer, opening the printer
covers, or releasing the paper set lever, or the printer will have
to re-initialize. In that case, there may not be enough ink left
in the original cartridges and you may have to replace them
with new ones.
When you installed the ink cartridges that came with the
printer, it was initialized as either a Photographic Dye ink
model or UltraChrome ink model. If you don't use the correct
replacement cartridges for your model, you will see an error
message and your printer won't work until you insert the
correct cartridges.
If you have a Stylus Pro 9600 that uses UltraChrome ink, you
can install any combination of 110 and 220 ml cartridges.
Unless you're planning to switch between black ink modes
(see page 12), be sure to replace the black ink cartridges with
the same type as you're currently using.
Use the following cartridges before the expiration date on the
package:
Photographic Dye ink users:
Black* T545100
Cyan T545200
Magenta T545300
* Your printer requires two black ink cartridges.
UltraChrome ink users:
Cartridge 110 ml
Photo Black** T543100
Matte Black** T543800
Light Black** T543700
Cyan T543200
Magenta T543300
Light Magenta T543600
Light Cyan T543500
Yellow T543400
* Stylus Pro 9600 only.
** Your printer uses two black ink cartridges. Unless you are switching
between black ink modes, use the same type of cartridges as are
currently installed. Check their type by looking at the installed
cartridges. If you install an incorrect cartridge, you will see the
message WRONG INK CARTRIDGE.
5 - EPSON Stylus Pro 7600 and 9600
Light cyan T545600
Light magenta T545500
Yellow T545400
220 ml*
T544100
T544800
T544700
T544200
T544300
T544600
T544500
T544400

User-Replaceable Parts

You can order these user-replaceable parts:
Part
Relacement Ink Maintenance Tank
Replacement Printer Cutter Blade (replaces the
printer's built-in cutter)
Options
The following options are available:
Part
EPSON Stylus Pro 7600 Printer Stand
EFI ® Fiery ® Spark Professional 2.0 Software RIP
Internal 10/100 BaseT (Ethernet
card
Internal IEEE 1394 (FireWire
Automatic Take-Up Reel System (Stylus Pro 9600 only)
Replacement 44-inch Take-up Reel Core
(Stylus Pro 9600 only)
Paper Roller Spindle (Normal Tension) — 2- or 3-inch
Paper Roller Spindle (High Tension) — 2- or 3-inch
Manual Media Cutting System*
Replacement Manual Cutting Blade (for Manual Media
Cutting System)
* Designed for use with heavy media, which may damage the printer's
built-in cutter.
7/02
Part number
C120890071
C12C815241
Part number
C12C844061
C842832
™ ) Type-B interface C12C823912
™ ) Type-B interface card C823722
C12C815251
C815121
Stylus Pro 7600: C12C811161
Stylus Pro 9600: C12C811151
Stylus Pro 7600: C12C811155
Stylus Pro 9600: C12C811152
Stylus Pro 7600: C12C815231
Stylus Pro 9600: C815182
C815192