Safety Approvals - Epson Stylus Pro 7600 Product Information

EPSON Stylus Pro 7600 and 9600
Electrical
Specification 120V Model
Input voltage range 90 to 132V
Rated frequency range 50 to 60 Hz
Input frequency range 49 to 61 Hz
Rated current 1.0A
Power consumption Stylus Pro 7600: Approx. 50 W (ISO 10561
Letter Pattern)
Stylus Pro 9600: Approx. 55 W (ISO 10561
Letter Pattern)
Both printers: 12 W or less in sleep mode
Mechanical
Paper feed Friction feed (roll and cut sheet)
Paper path Roll paper or cut sheets with manual
insertion
Dimensions Stylus Pro 7600:
Width: 43.3 inches (1100 mm)
Depth: 22.5 inches (572 mm)
Height: 22.0 inches (560 mm)
Stylus Pro 9600:
Width: 63.9 inches (1624 mm)
Depth: 28.2 inches (717 mm)
Height: 46.5 inches (1181 mm), including
stand
Weight Stylus Pro 7600: 96 lb (43.5 kg) without
ink cartridges or stand
Stylus Pro 9600: 185 lb (84 kg) without ink
cartridges or stand
Environmental
Temperature Operation: 50 to 95 °F (10 to 35 °C)
Storage:
Transit
Humidity Operation: 20 to 80% RH
(without Storage:
condensation) Transit
3 - EPSON Stylus Pro 7600 and 9600
220−240V Model
198 to 264V
0.5A
4 to 104 °F ( 20 to 40 °C)
– –
1 month at 104 °F (40 °C)
4 to 140 °F ( 20 to 60 °C),
– –
stored in shipping container
120 hours at 140 °F (60 °C)
20 to 85% RH
5 to 85% RH (stored in
shipping container)
Paper
The allowable paper dimensions are shown below:
Roll paper
Size 8.3 to 44.0 in. wide
(Stylus Pro 9600) (210 to 1118 mm)
Size 8.3 to 24.0 in. wide
(Stylus Pro 7600) (210 to 610 mm)
Maximum 2 in. core: 4 in. (103 mm)
external roll 3 in. core: 6 in. (150 mm)
diameter
Thickness 3.15 to 19.7 mil (0.8 to
0.5 mm)
Notes:
❏
Poor quality paper may reduce print quality and cause paper jams
and other problems. If you encounter problems, switch to a
higher grade of paper.
❏
Do not use curled, folded, or deckle-edge paper.
❏
Depending on the media, best feed and print quality are
guaranteed on EPSON paper with thicknesses of 3.15 to 4.33 mil
(0.08 to 0.11 mm), 64 to 90 gsm.
❏
For best results, use paper under the following conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
™
BorderFree (marginless) printing is available in the following
paper widths:
❏ 8 to 8.5 inches
❏ 10 inches
❏ 12 inches
❏ 14 inches
❏ 16 inches
When printing BorderFree, set the image size in your
application to be approximately 3 mm (1/8 inch) larger than
the intended size of your printed image.

Safety Approvals

Safety standards UL 1950, CSA C22.2 No. 950 FDA
EMC FCC part 15 subpart B, class B,
CSA C108.8 class B
7/02
Cut sheets
8.5 × 11 in. up to 44 in.
wide
8.5 × 11 in. up to 24 in.
wide
—
3.15 to 59 mil (0.8 to
1.5 mm)
❏ 20 inches
❏ 24 inches
❏ 36 inches (Stylus Pro 9600
only)
❏ 44 inches (Stylus Pro 9600
only)