Hawksmoor CS5300-3 Original User Instructions page 23

2. STORAGE
When storing, the tool must be turned off, cooled, emptied of fuel and thoroughly cleaned.
Store the tool in a dry, clean place, preferably in its packaging, and out of the reach of children. Store
all accessories and other items with the tool.
MAINTAINANCE AND STORAGE
LIST OF VULNERABLE PARTS
Description
Spark plug
Guide bar
Saw chain
g. chain saw
Check each time the cutter and cutting angles are as shown
below.
h. Sharpening of the chain
For best performance, we strongly recommend that you
periodically sharpen the chain. The chain can either be
sharpened by a professional or by yourself by providing you
with a sharpening guide (make sure you know how to use it).
The chain must be sharpened when:
- Wood chips have become powder
- To perform a normal cut, force on the tool#
- The cut is not straight
- Vibration increase
- Fuel consumption has increased
- Sharpening method:
The chain saw must be switched off and locked before
sharpening. Use a round file or sharpening device (see in
store).
Place the file on the tooth and push straight. Shift with the
same movement.
After sharpening all teeth, check if the teeth are sharp.
Models or specification
L8RTF/LD
208PXBK095
21BPX078X
23