1. Manuals
  2. Brands
  3. Hawksmoor Manuals
  4. Chainsaw
  5. CS5300-3
  6. Original user instructions

Hawksmoor CS5300-3 Original User Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Original User's Instructions
53cc Petrol Chain Saw
SKU: 47912
WHAT'S IN THE BOX
Chain saw x 1
Brake cover x 1
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE
Bar cover x 1
Oregon chain x 1
Oregon bar x 1
If you do not have all these items, please contact:
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
Fuel bottle x 1
Hex key x 1
Socket wrench/ slotted
screw drive x 1
Screw driver x 1

Advertisement

Table of Contents
loading

Related Manuals for Hawksmoor CS5300-3

Summary of Contents for Hawksmoor CS5300-3

  • Page 1 Original User’s Instructions 53cc Petrol Chain Saw SKU: 47912 WHAT'S IN THE BOX Chain saw x 1 Bar cover x 1 Fuel bottle x 1 Oregon chain x 1 Hex key x 1 Socket wrench/ slotted screw drive x 1 Screw driver x 1 Oregon bar x 1 Brake cover x 1...

  • Page 2: Specification

    SPECIFICATION Technical Data Model CS5300-3 Type of engine RY1E45F (air cooled 2-stroke petrol engine) Fuel Tank Volume 550cm³ Oil tank volume 260cm³ Idle speed of the engine 3100±300/min Engine speed with cutter running 4300/min Maximum power 2.0kW Displacement 53cm³ Maximum engine power speed...
  • Page 3 EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS Before any use, refer to the corresponding paragraph in the manual. This symbol, before a safety comment, indicates a precaution, a warning or a danger. Ignoring this warning can lead to an accident for yourself or for others. To limit the risk of injury, fire, or electrocution, always apply the recommendations indicated.
  • Page 4 Guaranteed sound power level data (114dB), in accordance with Directive 2000/14/ Beware of kickback (recoil). Avoid contact with the tip of the guide bar (chain return point). This will result in kickback of the chainsaw. DO NOT hold the saw with one hand. Hold the saw frmly with both hands.

  • Page 5: Health And Safety

    HEALTH AND SAFETY WARNING! When using this type of power tool, basic precautions should always be followed to reduce the risk of fire, electric shock and injury. • Read all instructions carefully before attempting to use this product and retain these instructions. Be familiar with all the operations described in these operating instructions.
  • Page 6 • When transporting the machine: o Secure the machine during transport to prevent loss of fuel, damage or injury. o Use a carrying case to protect the cutter during transport. • Keep people and animals away from the work area. Children and people who do not know how to use this tool should not touch it and handle it.
  • Page 7 manufacturer. Use of other accessories may result in an accident. Read the "Technical Data" section of this instruction manual or ask your dealer for advice. • Do not lean. Keep a good seating and balance at all times. • To maintain tools and accessories carefully, keep cutting tools sharp and clean for better and safer performance.
  • Page 8 • Do not stop the chain with your hands or other objects. • Treat the chain teeth with caution during operation; they can cause severe cuts. • When not in use, the machine must be stored in a dry, locked place out of the reach of children.
  • Page 9 damaged and bring it to repair if necessary. • Do not place any part of the body on the chain when the chainsaw is operating. Before starting the chain saw, make sure that the chain is not in contact with anything. A moment of inattention during use may cause your clothing or body part to stick to the chain.

  • Page 10: Fuel Handling

    weather in general. Fuel Handling • Be very careful when handling fuels. They are flammable and the vapors are explosive. • Use only an approved container. • Never remove the fuel cap or add fuel while the machine is on. Turn off the unit and allow the engine and exhaust components to cool before refueling.

  • Page 11: Residual Risks

    cutting chain in the cutting section. • The contact of the tip may in some cases cause a sudden reverse reaction by bouncing the chain guide up and back towards the operator. • Pinching of the cutting chain on the upper part of the chain guide can force the chain guide to the operator abruptly.
  • Page 12 following hazards may arise in the structure and design of this product: • Always be vigilant when using this product, so you can recognize and manage the risks rather. • Rapid intervention can prevent serious injury and property damage. • Turn off and unplug the tool if there are any malfunctions. Have it checked by a qualified professional and have repairs carried out, if necessary, before using it again.
  • Page 13 COMONENT LIST 1. Chain and saw 2. Chain brake 3. Starter 4. Chock 5. Safety trigger lock 6. Stop switch 7. Fuel tank 8. Needle 9. Handle 10. Oil tank 11. Air filter cover Not all the accessories illustrated or described are included in standard delivery.

  • Page 14: Assembly And Use

    ASSEMBLY AND USE a. Assembly of the chain guide IMPORTANT: The machine must not be started during assembly. Wear protective gloves when handling the blade. 1) Pull the guard toward the front handle to check that the chain brake is not engaged. 2) Loosen the nuts and remove the chain cover.
  • Page 15 6) Adjust the chain tension by turning the tension screw until the straps touch just the bottom side of the bar. Check if the chain is rotated correctly and tight. While lifting the chain guide, turn the content screw to apply correct tension to the chain.
  • Page 16 Unleaded gasoline is a quality gasoline type. This will help to avoid damaging the fuel lines of the engine and other engine parts. The recommended mixing ratio is 40:1 (make sure the mixing ratio is correct before filling the product. a.
  • Page 17 1. Starting the engine a. Set the switch to position I. START b. Pull the choke lever. It will close and the throttle will be moved to the starting position. Hold the chainsaw firmly against the ground. Put the chainsaw: ∫...
  • Page 18 3. Main settings a. Adjusting the carburetor The carburetor is preset at the factory. To avoid malfunction, it is recommended not to adjust the adjustment screws. If these screws require readjustment, have the machine serviced by your service center. Stop the tool and tighten the needle L until it stops. Do not force it.
  • Page 19 c. Release of the chain brake To use the chain saw again, the chain brake must be Releasing Stop activated released. This must be done machine off and cooled. Pull the shield until it returns to its original position. d. Sharpening of the chain For best performance, we strongly recommend that you periodically sharpen the chain.
  • Page 20 Before bending a branch or trunk in bending, observe the direction of bending and finish the cut opposite the bending side to prevent the chain guide from getting stuck in the cut. a. Felling of trees Examine the work area and estimate where the tree will fall. Start the machine as described above.

  • Page 21: Care And Cleaning

    CARE AND CLEANING 1. Maintenance Before any maintenance work, the machine must be switched off and completely cooled. Perform the maintenance work according to the instructions below and perform them regularly. A clean, well-maintained machine increases its standard of living and efficiency.
  • Page 22 d. Guide bar Cleaning: Remove bar guide to remove dirt from grooves and oil inlet. Regularly grease the pinion. Check: Reverse the bar from time to time to avoid the effects of wear. The bar rail should always be in place. Use a ruler to observe it.
  • Page 23 g. chain saw Check each time the cutter and cutting angles are as shown below. h. Sharpening of the chain For best performance, we strongly recommend that you periodically sharpen the chain. The chain can either be sharpened by a professional or by yourself by providing you with a sharpening guide (make sure you know how to use it).

  • Page 24: Troubleshooting

    TROUBLE SHOOTING Use this section to help you to try and solve any problems you may have Fault Possible Cause Solution Unit won’t start or 1. Incorrect starting procedures 1. Follow instructions in the user starts but will not run guide or refer to the starting 2.
  • Page 25 NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.
  • Page 26 DECLARATION OF CONFORMITY / PERFORMANCE Product Code: 47912/CS5300-3 Product Description: Hawksmoor 53cc 50cm Petrol Chainsaw 1. Toolstation Limited, Express Park, Bristol Road, Bridgwater, Somerset TA6 4RN This declaration of conformity is issued under the sole responsibility of Toolstation 2. Object of the declaration...

  • Page 27: Environmental Information

    ENVIRONMENTAL INFORMATION When your product comes to the end of its life or you choose to update or upgrade it by replacing it, please do not dispose of it with your normal household waste. Please recycle where facilities exist. When you need to dispose of this product, check with your retailer or local authority for suitable options.

  • Page 28: Customer Support

    GUARANTEE Toolstation products deliver reliable service for normal, household use in domestic settings. All Toolstation products are individually tested before leaving the factory. If you are a consumer and you experience a problem with your Toolstation product, which is found to be defective due to faulty materials or workmanship within the Guarantee Period, this Toolstation Guarantee will cover repair or - at the discretion of Toolstation –...

This manual is also suitable for:

47912

Table of Contents