Assembly And Use - Hawksmoor CS5300-3 Original User Instructions

ASSEMBLY AND USE

2
a. Assembly of the chain guide
1) Pull the guard toward the front handle to check that the
chain brake is not engaged.
2) Loosen the nuts and remove the chain cover.
3) Install the guide and mount the chain on the pinion and
guide in the direction shown in the diagram.
4) Attach the bracket and screw it in place.
1
Tighten
5) Reinstall the cover and screw it with the two screws.
IMPORTANT: The machine must not be started
during assembly. Wear protective gloves when
handling the blade.
14