Table of Contents
Advertisement
Installation Guide
3
Area of use
3.1
Area of use
The passive/active cooling module can be used for cooling requirements greater than what can be obtained
through only passive cooling (free cooling). For cooling requirements at max 20 kW.
The cooling modules make it possible to retain either passive or passive/active cooling from the rock –ground-
water collectors. The distribution system for this can be the radiator system (fan coils) or under floor heating
systems. Cooling starts when the outside temperature exceeds the set value for seasonal stop.
8
Cooling module for domestic heat pump (Genesis platform),
Passive and Passive/Active
VIMAB102
Danfoss Heating Solutions
Advertisement
Table of Contents
