Front Panel Connectors: Jfp1; Front Usb Connectors: Jusb1 / Jusb2 - MSI AmethystM Manual

MS-7184 M-ATX Mainboard

Front Panel Connectors: JFP1

The mainboard provides one front panel connector for electrical connection to
the front panel switches and LEDs. The JFP1 is compliant with Intel
Connectivity Design Guide.
Power Power
LED Switch
2 10
JFP1
1
9
HDD
Reset
LED
Switch

Front USB Connectors: JUSB1 / JUSB2

The mainboard provides two standard USB 2.0 pin headers JUSB1 & JUSB2 .
USB 2.0 technology increases data transfer rate up to a maximum throughput of
480Mbps, which is 40 times faster than USB 1.1, and is ideal for connecting high-
speed USB interface peripherals such as USB HDD, digital cameras, MP3 players,
printers, modems and the like.
2
1
JUSB1, JUSB2
(USB 2.0)
Connected to JUSB1 or JUSB2
MSI Reminds You...
Note that the pins of VCC and GND must be connected correctly to
avoid possible damage.
2-16
JFP1 Pin Definition
PIN SIGNAL DESCRIPTION
1 HD_LED_P Hard disk LED pull-up
2 FP PWR/SLP MSG LED pull-up
3 HD_LED_N Hard disk active LED
4 FP PWR/SLP MSG LED pull-up
5 RST_SW_N Reset Switch low reference pull-down to GND
6 PWR_SW_P Power Switch high reference pull-up
7 RST_SW_P Reset Switch high reference pull-up
8 PWR_SW_N Power Switch low reference pull-down to GND
9 RSVD_DNU Reserved. Do not use.
JUSB1 & JUSB2 Pin Definition
PIN SIGNAL
1 VCC
10
3 USB0-
9
5 USB0+
7 GND
9 Key (no pin)
®
Front Panel I/O
PIN SIGNAL
2 VCC
4 USB1-
6 USB1+
8 GND
10 USBOC
USB 2.0 Bracket
(Optional)