Samsung EB-PA510 User Manual page 250

Using the battery pack
2
After the mobile device is fully charged, disconnect the USB cable from both devices.
• T o stop charging, press and hold the Power button for approximately two seconds.
To resume charging, press the Power button.
• Y ou can use the battery pack while it is charging but you may not be able to use it
if the battery level is too low.
• I f the mobile device is not charging after being connected to the battery pack,
press the Power button.
• T he battery pack is an auxiliary external battery. It may not fully charge some
mobile devices.
• I f the battery pack is exposed to extremely hot or cold temperatures or an error
occurs, the indicator light will flash. Disconnect the mobile device from the battery
pack, and then reconnect them.
Checking the charging status
The indicator light alerts you to the connected mobile device's charging status.
Status
Charging
Fully charged
Indicator light
100%
100%
English (USA)
0%
0%
9
7