Renesas H8S/2237 Series User Manual page 16

Fasten the user system interface cable head to the IC socket for a TFP-100G package on the user
system with the four screws (M2
time, alternating between screws on opposing corners. Take special care, such as manually securing
the IC socket soldered area, to prevent the soldered IC socket from being damaged by
overtightening the screws or twisting the components.
Pin 1
Figure 4
x 10 mm) provided. Each screw should be tightened a little at a
User system
Connecting User System Interface Cable to User System
Screws (M2 x 10 mm)
Cable head
IC socket
(NQPACK100SE
manufactured by
Tokyo Eletech Coporation)
7