Section 2 Connection Procedures
2.1
Connecting User System Interface Cable to Emulator Station
Always switch OFF the user system and the emulator
product before the USER SYSTEM INTERFACE CABLE is
connected to or removed from any part. Before connecting,
make sure that pin 1 on both sides are correctly aligned.
Failure to do so will damage the user system and the
emulator product or will result in PERSONAL INJURY. The
USER PROGRAM will be LOST.
To connect the cable body to the emulator station, make sure the user system and emulator station
are turned off.
Figure 2
Connecting User System Interface Cable to Emulator Station
WARNING
Emulator station
Cable body
User system interface cable
3