Maintenance - NDS PLUS 25 User Manual

The switch on the device must always be left in the ON
position (1), for normal operation.
If the switch is set to OFF (0), the
disabled only from the "Alternator" charge source, then
it continues to operate from the solar panel and / or
230V mains (for the GOLD model), but it will not work
while the engine is running. The switch should be set to
OFF (0) only if the device malfunctions, disconnecting it
when the engine is switched on, and allowing the
battery to be charged using the alternator directly,
using the original system.

11. MAINTENANCE

The POWERSERVICE
to continue operating properly. we periodically
recommend:
• Clean externally to prevent accumulation of dust
and dirt.
• Check that the input connections and the battery
poles are tight and SECURE.
• Make sure that the ventilation slots are not
obstructed by dirt or any material.
requires minimal maintenance
26
POWERSERVICE is