Temperature Settings Warnings; Temperature Indicator - Frigidaire FFR32GFELT User Manual

If Super Switch is available:
• Set this switch to the '
when the ambient
temperature is below 16°C,
such as in winter, or when
the freezer temperature
needs to be maintained at a
lower value. In this case,
turn the switch to ' '
position ON.
• Press the switch on the
thermostat box to position
' ' to set the super switch
ON. The switch will illuminate.
• When the freezer compartment has
cooled to a sufficient temperature, or in
warm weather, turn the super switch off
to save on electrical consumption.
• When you first switch on the appliance,
allow it to operate continuously for
24 hours in order to reach operating
temperature.
• During this time, do not open the door
frequently or place a large quantity of
food inside the appliance.
If the unit is switched off or unplugged,
you must allow at least 5 minutes before
restarting or plugging in the unit in order to
prevent damage to the compressor.

3.2 Temperature Settings Warnings

• The ambient temperature, temperature of
the freshly stored food and how often the
door is opened affects the temperature in
the refrigerator compartment. If required,
change the temperature setting.
• It is not recommended that you operate
your fridge in environments colder than
10°C in terms of its efficiency.
• When setting the thermostat, take into
consideration how often the appliance
doors are opened and closed, how much
food is stored in the refrigerator, and the
environment in which the refrigerator is
located.
' position, except
EN - 29
• When the appliance is first switched on,
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
• Unplug your appliance during a power cut
to prevent damage to the compressor.
Once power is restored, delay plugging
in your appliance for 5 to 10 minutes.
This will help prevent damage to the
appliance's components.
• Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
outside of the stated temperature ranges.
This will reduce the cooling efficiency of
the appliance.
• Your appliance is designed to operate in
the ambient temperature (ST/N = 16°C
- 38°C) intervals stated in the standards,
according to the climate class displayed
on the information label. We do not
recommend operating your appliance out
of the stated temperature limits in terms
of cooling effectiveness.
Climate
Class
T Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN Between 10 and 32 (°C)

3.3 Temperature indicator

In order to help you better set your
refrigerator, we have equipped it
with a temperature indicator
located in the coldest area.
To better store the food in your
refrigerator, especially in the
coldest area, make sure the
message "OK" appears on the
temperature indicator. If « OK » does not
appear, this means temperature has not
been set properly
Ambient Temperature
o
OK
C