Replacing An Ink Cartridge; Removing And Installing Ink Cartridges - Epson Stylus Photo 925 Manual

EPSON Stylus Photo 925

Replacing an Ink Cartridge

You can check the status of the ink cartridges by looking at the
icons on the control panel:
Black ink cartridge
The level of ink shown inside the icons indicates the amount
of remaining ink. If an ink cartridge is low, the corresponding
ink cartridge icon flashes; the red
This is a good time to make sure you have a new cartridge. If
an ink cartridge is empty, the red
and you see a message telling you that the cartridge needs to
be replaced.
You cannot print if either ink cartridge is empty. Leave
the empty cartridge installed in the printer until you have
obtained a replacement, or the ink remaining in the print
head nozzles may dry out.
When an installed cartridge is more than six months old, you
may need to replace it if printouts don't look their best. If the
quality doesn't improve after cleaning and aligning the print
head, you can replace the cartridge even if the
off.
Use these EPSON ink cartridges within six months of
installing them and before the expiration date on the package:
❏ Black ink cartridge: T026201
❏ Color ink cartridge: T027201
To ensure good results, use genuine EPSON ink
cartridges and do not refill them. Other products may
cause damage to your printer not covered by EPSON's
warranty.
When you need new ink cartridges, contact your dealer or
call the EPSON Store at (800) 873-7766 or visit
www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.

Removing and Installing Ink Cartridges

Be sure you have a new ink cartridge before you begin. Once
you start the ink cartridge replacement procedure, you must
complete all the steps in one session.
1. Make sure the printer is turned on and not printing, then
open the printer cover.
EPSON Stylus Photo 925
8 -
Color ink cartridge
b
error light also flashes.
b
error light remains on
b
error light is
2. Do one of the following:
b
If the red error light is on (cartridge is empty), press the
b
maintenance button.
b
If the red error light is flashing (cartridge is low), press
b
the maintenance button. You see
automatically highlighted in the Advanced
Replacement
Settings menu. Press the
b
If the error light is off, you can still replace an ink
cartridge. Use the
After entering the Advanced Settings menu, select Ink
Cartridge Replacement. Continue with the steps below.
3. You see a message on the display telling you that ink
cartridge replacement will begin. Press
continue. The print head moves to the center.
4. The black cartridge is on the left and the color cartridge is
on the right. Open the ink cartridge cover, then lift the
cartridge out of the printer and dispose of it carefully.
Keep ink cartridges out of the reach of children and do
not drink the ink.
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets in your eyes, flush them
thoroughly with water.
9/02
Ink Cartridge
button.
Select
button to highlight Advanced Settings.
button
Custom
to
1