Emptying Your Dehumidifier - Russell Hobbs RHDH1001 Manual

USING YOUR DEHUMIDIFIER
Error Codes
P2 – Water drawer is full or drawer is not in the right position. Empty
the drawer and replace in the correct position.
AS - Humidity module sensor error. Unplug the unit and plug it back in. If
error repeats, call customer service.
ES - Tube Temperature sensor error. Unplug the unit and plug it back in.
If error repeats, call customer service.
EC -Refrigerant leakage detection. With this new technology, the display
area will appear EC when the unit detects refrigerant leakage, call
customer service

EMPTYING YOUR DEHUMIDIFIER

There are two ways to remove collected water:
Collection in the Water Tank
•
When the water tank is full, the unit will automatically stop running,
and the Full indicator light will illuminate.
•
Slowly pull out the tank and grip the left and right handles securely
and carefully. Pull out the water tank straight so the water in the
tank does not spill. Do not put the tank down because the bottom of
the drawer is uneven.
•
Empty the water and replace the tank. The tank must be correctly
inserted for the dehumidifier to restart operation.
•
The machine will restart operation after 3 minutes
Page 13
Water outlet