Connection To The Mains Supply - Russell Hobbs RHDH1001 Manual

CONNECTION TO THE MAINS SUPPLY

This appliance is designed to operate from a mains supply of
220-240V~ 50Hz.
Check that the voltage marked on the product corresponds
with your supply voltage.
How to change the fuse
1. Slot the end of a screwdriver into the
recess in the fuse holder of the plug.
2. Pull the fuse holder upwards until free
of the plug and slide the fuse out.
3. Insert the new fuse by sliding into the
fuse holder and refit the fuse holder by
pushing this onto the plug until locked
into place.
Important: Only ever use a 13 amp fuse.
Page 20